HyGeoWorks
🔒 Previews run in your browser (WebAssembly) · Inputs are sent only when you formally export
Taiwan SWC Handbook §2.1 & Technical Regulations Art. 65 · Spillway, Freeboard & Apron

Gravity Check Dam Spillway, Freeboard & Downstream Apron Calculator

Hydraulic layout calculator for gravity check dams with US customary inputs (cfs, ft). The calculation core applies the Taiwan Soil and Water Conservation Handbook (2017) §2.1 (trapezoidal spillway, freeboard and apron equations) and Technical Regulations Art. 65: it computes the sediment-laden design discharge, the overflow depth, freeboard, apron length, end sill height and sub-dam spacing, and checks the overflow depth against the handbook limit.

Standards and references (context for this calculation; the basis the calculator applies is the one stated below):

Design basis for this page ▾
Taiwan Soil and Water Conservation Handbook (2017) §2.1 Eqs. 2.1.2–2.1.4, 2.1.46–2.1.50 (trapezoidal spillway, freeboard, apron)Taiwan Soil and Water Conservation Technical Regulations Art. 65

Design basis as reported by the calculation core: Taiwan Soil and Water Conservation Handbook (2017) §2.1 Eqs. 2.1.2–2.1.4, 2.1.46–2.1.50 (trapezoidal spillway, freeboard, apron); Taiwan Soil and Water Conservation Technical Regulations Art. 65

Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List.

Interactive US Customary Engineering Workstation
US customary inputs, shown as US (SI) in the results
Free Samples and Pricing
A public sample produced by the production service from this page's standard example and sealed with a verification code: open it in Word or AutoCAD and check it on the Verify page. Not for PE sealing or submittal.
Single-export pass: US$19 for one calculator, 3 formal exports in total within 24 hours of the first; full credit toward an upgrade within 30 days, full refund before the first export
Single-export passes (one calculator, 3 exports within 24 hours), 30-day passes, annual plans and perpetual licenses; printable quotes for purchase orders.
Formal export and the Project List are on the workbench toolbar above:
Licensed users can formally export this calculator's Word report (with a verification code and server time witness) and AutoCAD DXF drawing, or add several calculators to the free Project List and export a multi-chapter project report online, with nothing to install on a Mac. Projects with DEM terrain or GIS files can run in the heavy cloud computation or in the HydroStudio desktop edition.
The summary lists the basis, key results and check verdicts; its first line marks it as an online preview, not for PE sealing or submittal.
Download the Offline Workbench (Single HTML File, 39 Tools)
No install and no email required. It contains the same calculation core as this site; results are also a preview, not for sealed submittals.

Check Summary Preview (Software Format; Auto-Populated)

Check Dam Spillway, Freeboard & Apron Calculator (US Customary Inputs): check summary (software format)
Calculation basis: Taiwan Soil and Water Conservation Handbook (2017) §2.1 Eqs. 2.1.2–2.1.4, 2.1.46–2.1.50 (trapezoidal spillway, freeboard, apron); Taiwan Soil and Water Conservation Technical Regulations Art. 65
Check item Trial value Status
Spillway Overflow Depth h1.484 m ≤ 3.0 mOK

Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.

Desktop edition: calculation reports and cross-module quantity reconciliation

1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).

Desktop pricing (Pro US$990/yr) Download the desktop trial Complimentary license for agency reviewers and faculty
Scope and responsibility: This page is a single-calculator trial run; cross-module quantity reconciliation is done in desktop project runs. Problems outside this calculator's scope (see the FAQ) need an appropriate analysis method. Final submittals require review and seal by a licensed Professional Engineer.

Governing Equations (US Customary Notation) & Basis Reported by the Calculation Core

The equations and limits the calculation core applies are listed below for independent checking.

Design Discharge & Trapezoidal Spillway (Taiwan SWC Handbook §2.1 Eqs. 2.1.3–2.1.4)
Q_d = (1 + α) · Q_p, Q_d = 0.354 · b_u · (2 + 3χ) · h^1.5 [SI: m³/s, m], χ = b_o / b_u, b_u = b_o + 2·Z·h
b_u = water-surface width at the spillway; h = overflow depth. In cfs and ft the coefficient 0.354 becomes about 0.641. The core checks h against the handbook limit (3.0 m, or 4.0 m on rock).
Downstream Apron, End Sill & Sub-Dam Spacing (Eqs. 2.1.46–2.1.50)
L = c · (H_e + h), end sill height = 0.2 · H_e, main-to-sub-dam spacing = (1.5 to 2.0) · (H_e + h)
H_e = effective dam height; the worked example lists the apron length, end sill height and spacing range computed by the core.

Worked Example: 20-ft Effective Height Check Dam (Q_p = 1,000 cfs)

The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.

Size the trapezoidal spillway overflow depth, freeboard and downstream apron length for a check dam (effective height 20 ft, total height 25 ft) on an 8.0% channel carrying a clear-water peak of 1,000 cfs with a 10% sediment allowance, spillway bottom width 30 ft and side slope 1:0.5.

Every number in this example was produced by the calculation core (WebAssembly) when this page was built. The calculation core works in SI units: the US customary inputs below are converted with exact NIST SP 811 factors before the calculation, and results are shown in US customary units with the core's SI value in parentheses. Check values, criteria and calculation steps are the core's own SI output. Basis reported by the core: Taiwan Soil and Water Conservation Handbook (2017) §2.1 Eqs. 2.1.2–2.1.4, 2.1.46–2.1.50 (trapezoidal spillway, freeboard, apron); Taiwan Soil and Water Conservation Technical Regulations Art. 65

1. Input Parameters

Design ParameterUS Customary ValueUnit
Clear-Water Peak Flow Q_p1000cfs
Sediment Allowance α0.1—
Spillway Bottom Width b_o30ft
Spillway Side Slope Z (1:Z)0.5—
Channel Bed Slope S_o0.08m/m
Effective Dam Height H_e20ft
Total Dam Height H25ft
Sound Rock FoundationNo—
Dam Body Stability CheckNot calculated—

2. Computed Results (calculation core output)

OutputResult
Design Discharge Qd1100 cfs (31.149 m³/s)
Spillway Overflow Depth h4.868 ft (1.484 m)
Spillway Freeboard hf1.969 ft (0.600 m)
Downstream Apron Length L49.74 ft (15.16 m)

Verification Checks (calculation core output)

Verification ItemComputed ResultGoverning Limit / CriterionStatusBasis
Spillway Overflow Depth h1.484 m≤ 3.0 mPASSTaiwan Soil and Water Conservation Handbook (2017) §2.1 (p. 321)

3. Calculation Steps (calculation core output, SI units)

[HyGeoWorks online preview - not for PE sealing or submittal]
Design debris-laden peak discharge Qd = (1 + 0.1) × 28.3168 = 31.149 m³/s
Trapezoidal spillway depth: Qd = 0.354·bu·(2 + 3χ)·h^1.5 → overflow depth h = 1.484 m, top width bu = 10.628 m, freeboard hf = 0.600 m
Downstream apron length L = 15.16 m, end sill height = 1.22 m, sub-dam spacing = 11.37–15.16 m
US customary equivalents (NIST SP 811 conversion of the SI values reported by the core above; the core summary itself is unchanged)
  Design Discharge Qd = 1100 cfs
  Spillway Overflow Depth h = 4.868 ft
  Spillway Freeboard hf = 1.969 ft
  Downstream Apron Length L = 49.74 ft

Frequently Asked Questions (Basis, Scope & Limits)

Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.

Which design basis does this calculator follow?

The calculation core reports the Taiwan Soil and Water Conservation Handbook (2017) §2.1 (Eqs. 2.1.2–2.1.4 and 2.1.46–2.1.50) and the Taiwan Soil and Water Conservation Technical Regulations Art. 65. The inputs and results are shown in US customary units, but no US agency method (for example a debris-yield or debris-basin method) is applied; check against the requirements of your agency.

Does this web calculator check the stability of the dam body?

No — it sizes the spillway, freeboard and downstream apron only. The HydroStudio desktop edition includes gravity check-dam body stability (self-weight, water and sediment pressure, uplift, seismic forces, and debris-flow fluid force and boulder impact) per the Taiwan Soil and Water Conservation Technical Regulations Arts. 102–104 and the handbook §2.1.

Why should the wings rise toward the abutments with generous freeboard?

If debris or boulders partly block the spillway, flow overtopping the wings at the abutment contact can outflank and erode the dam. Keeping the flow in a recessed spillway notch with freeboard on the wings reduces this risk.

When is a sub-dam (counter-dam) used instead of a simple end sill?

A sub-dam creates a tailwater pool that submerges the jump below the main dam. The core reports the main-to-sub-dam spacing range of the handbook, (1.5 to 2.0) times (H_e + h); whether a sub-dam is needed depends on the bed material and the criteria of your agency.

USD Pricing · Checkout by Stripe · Printable USD Quotation

From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark

The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.

Monthly
Pro monthly
$119 / month
One discipline: $69 / month. Renews monthly until canceled; cancel any time before the next renewal and keep using it to the end of the paid month.
Buy monthly ($119/mo)
30 days
30-day pass
$79 / 30 days, one discipline
All modules: $135. One payment; it does not renew. The pass fee can be credited once toward an annual or perpetual license of the same discipline or a higher plan bought within 30 days after the pass ends, with the same email and in the same currency.
Buy a 30-day pass (from $79)
Quotation
Printable USD quotation
For any plan, including Firm (from 3 seats) and Enterprise (from 10 seats), which are sold only to businesses and other organizations, not to individual buyers: print the quotation or save it as a PDF for your purchasing process.
Request a printable USD quotation

Compare all plans, including 90-day passes and perpetual licenses

Checkout is processed by Stripe; a tax ID can be entered at checkout, and for one-time payments Stripe issues an invoice showing the buyer's name and tax ID. Procurement follows your organization's own rules.

Explore All 31 Tools (20 US Customary + 11 Reference: Basis Stated on Each Page)

Need to edit terrain, 2D flood models and design alternatives interactively on your computer, or see 3D views drawn from your project data? Use the HydroStudio desktop edition:
Download the Desktop Trial
No credit card or phone number is needed to download. Without a license it runs as a trial: local calculation and 3D viewing work, exported reports and drawings carry a trial watermark (not for submittal), and some built-in data libraries are limited. Plans and prices are on the Pricing page.