Counterfort Retaining Wall RC Design (Strip Method)
Flexure and one-way shear (with size effect) of the face slab horizontal strip and the heel slab longitudinal strip, sloping-face tension steel of the counterforts, and concrete volume.
Design basis as reported by the calculation core: Taiwan Design Code for Concrete Structures (2023; ACI 318-19 framework) Tables 6.5.2, 6.5.4, 22.5.5.1; Taiwan Soil and Water Conservation Technical Regulations Arts. 119, 120 (strip method)
Section design follows the Taiwan concrete code named in the basis line (ACI 318-19 framework). External stability (sliding, overturning, bearing) is not part of this calculator. Bar sizes are D13–D36 and strengths are entered in kgf/cm².
Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List; 3D schematic: fixed example, not drawn from your inputs.
Check Summary Preview (Software Format; Auto-Populated)
| Check item | Trial value | Status |
|---|---|---|
| Face slab bottom strip flexure φMn ≥ Mu | 136.60 kN·m/m ≥ 23.20 | OK |
| Face slab one-way shear (with size effect λs) φVc ≥ Vu | 120.8 kN/m ≥ 66.7 | OK |
| Heel slab strip flexure φMn ≥ Mu | 423.50 kN·m/m ≥ 50.15 | OK |
| Heel slab one-way shear (with size effect λs) φVc ≥ Vu | 178.0 kN/m ≥ 144.2 | OK |
| Counterfort base inclined main bars φMn ≥ Mu | 3396.7 kN·m ≥ 976.9 | OK |
Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.
Desktop edition: calculation reports and cross-module quantity reconciliation
1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).
Standard example (calculation core defaults)
The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.
The standard example uses the default inputs of the calculation core. Every number below was produced by the core when this page was built; nothing on this page is computed by hand.
Every number in this example was produced by the calculation core (WebAssembly) when this page was built. This calculator computes to the documents named in its basis line and works in SI units; use the unit button in the calculator to view US customary equivalents. Basis reported by the core: Taiwan Design Code for Concrete Structures (2023; ACI 318-19 framework) Tables 6.5.2, 6.5.4, 22.5.5.1; Taiwan Soil and Water Conservation Technical Regulations Arts. 119, 120 (strip method)
1. Input Parameters
| Design Parameter | Value | Unit |
|---|---|---|
| Face Slab Height H | 6 | m |
| Face Slab Thickness tf | 0.35 | m |
| Base Slab Thickness tb | 0.7 | m |
| Counterfort Thickness tw | 0.4 | m |
| Clear Spacing between Counterforts ln | 2 | m |
| Heel Length | 3.2 | m |
| Toe Projection | 0.8 | m |
| Number of Counterforts | 4 | — |
| Backfill Unit Weight γ | 18 | kN/m³ |
| Backfill Friction Angle φ | 32 | ° |
| Surface Surcharge q | 10 | kPa |
| Factored Bearing Pressure at Heel End | 40 | kPa |
| Concrete Strength fc′ | 280 | kgf/cm² |
| Rebar Yield Strength fy | 4200 | kgf/cm² |
| Face Slab Cover | 6 | cm |
| Heel Slab Cover | 8.5 | cm |
| Counterfort Sloping-Face Cover | 7.5 | cm |
| Face Slab Horizontal Bar Size | D16 (#5) | — |
| Face Slab Horizontal Bar Spacing | 15 | cm |
| Heel Slab Longitudinal Bar Size | D19 (#6) | — |
| Heel Slab Longitudinal Bar Spacing | 15 | cm |
| Counterfort Sloping-Face Tension Bar Size | D25 (#8) | — |
| Tension Bars per Counterfort | 6 | — |
2. Computed Results (calculation core output)
| Output | Result |
|---|---|
| Max flexural utilization Mu/φMn | 0.288 |
| Max one-way shear utilization Vu/φVc | 0.810 |
| Face slab flexural utilization | 0.170 |
| Heel slab flexural utilization | 0.118 |
| Counterfort inclined bar utilization | 0.288 |
| Face slab one-way shear utilization | 0.552 |
| Heel slab one-way shear utilization | 0.810 |
| Counterfort shear ratio Vu/φVc (φVc without shear reinforcement) | 3.996 |
| Rebar weight (per m of wall) | 451.8 kg/m |
| Concrete (per m of wall) | 6.745 m³/m |
Verification Checks (calculation core output)
| Verification Item | Computed Result | Governing Limit / Criterion | Status | Basis |
|---|---|---|---|---|
| Face slab bottom strip flexure φMn ≥ Mu | 136.60 kN·m/m | ≥ 23.20 | PASS | Taiwan Design Code for Concrete Structures (2023) Tables 6.5.2 and 6.5.4 |
| Face slab one-way shear (with size effect λs) φVc ≥ Vu | 120.8 kN/m | ≥ 66.7 | PASS | Taiwan Design Code for Concrete Structures (2023) Table 22.5.5.1 |
| Heel slab strip flexure φMn ≥ Mu | 423.50 kN·m/m | ≥ 50.15 | PASS | Taiwan Design Code for Concrete Structures (2023) Tables 6.5.2 and 6.5.4 |
| Heel slab one-way shear (with size effect λs) φVc ≥ Vu | 178.0 kN/m | ≥ 144.2 | PASS | Taiwan Design Code for Concrete Structures (2023) Table 22.5.5.1 |
| Counterfort base inclined main bars φMn ≥ Mu | 3396.7 kN·m | ≥ 976.9 | PASS | Taiwan Design Code for Concrete Structures (2023) |
3. Calculation Steps (calculation core output, SI units)
[HyGeoWorks online preview - not for PE sealing or submittal] Rankine Ka = 0.307; counterfort spacing S = 2.40 m centre to centre (clear spacing ℓn = 2.00 m); sloped back angle θ = 28.1° One-way shear size effect (Table 22.5.5.1): face slab d = 29.0 cm → λs = 0.962; heel slab d = 61.5 cm → λs = 0.760 Provided bars: face slab horizontal D16@15.0 cm (13.24 cm²/m); heel slab longitudinal D19@15.0 cm (19.10 cm²/m); counterfort inclined main bars 6-D25 (30.40 cm²)
Continuous one-way strip checks (Tables 6.5.2 and 22.5.5.1) (5 rows)
| Location | wu (kPa) | Mu (kN·m/m) | Required As (cm²/m) | Provided | φMn (kN·m/m) | Vu (kN/m) | φVc (kN/m) | Shear result |
|---|---|---|---|---|---|---|---|---|
| Face slab z = 1.50 m | 18.2 | 7.28 | 6.30 | D16@15.0 | 136.60 | 20.9 | 120.8 | OK |
| Face slab z = 3.00 m | 31.5 | 12.59 | 6.30 | D16@15.0 | 136.60 | 36.2 | 120.8 | OK |
| Face slab z = 4.50 m | 44.7 | 17.89 | 6.30 | D16@15.0 | 136.60 | 51.4 | 120.8 | OK |
| Face slab z = 6.00 m | 58.0 | 23.20 | 6.30 | D16@15.0 | 136.60 | 66.7 | 120.8 | OK |
| Heel slab strip | 125.4 | 50.15 | 12.60 | D19@15.0 | 423.50 | 144.2 | 178.0 | OK |
Counterfort tapered cantilever sections (per counterfort) (3 rows)
| Depth z (m) | Mu (kN·m) | Horizontal d (cm) | Required inclined As (cm²) | Provided inclined bars | Vu (kN) | φVc without shear reinforcement (kN) | Shear reinforcement |
|---|---|---|---|---|---|---|---|
| 3.00 | 148.7 | 187.5 | 2.43 | 6-D25 (30.4 cm²) | 131.0 | 65.2 | Minimum shear reinforcement required |
| 4.50 | 442.0 | 267.5 | 5.07 | 6-D25 (30.4 cm²) | 268.1 | 90.0 | Minimum shear reinforcement required |
| 6.00 | 976.9 | 347.5 | 8.64 | 6-D25 (30.4 cm²) | 453.1 | 113.4 | Minimum shear reinforcement required |
Assumptions and Limits Stated by the Calculation Core
- The strip method is a design convention: the face slab and heel slab are treated as continuous one-way slabs supported by the counterforts; moments wu·ℓn²/14 (end-span positive moment) and wu·ℓn²/10 (negative moment at the first interior support); shear 1.15·wu·ℓn/2 (Taiwan Design Code for Concrete Structures (2023) Tables 6.5.2 and 6.5.4)
- Table 6.5.2 applies (per 6.5.1) to continuous beams and one-way slabs under uniformly distributed gravity load; using it for lateral earth pressure strips is outside the stated scope and is engineering convention. Near the base the face slab is restrained by the base slab and acts two-way, so this method is conservative
- The counterfort is designed as a rectangular section (width = counterfort thickness, face slab flange ignored); tension bars follow the sloped back edge and the required area is already divided by cos θ; no shear reduction is taken for the tapered section
- Ties: horizontal ties from the face slab and vertical ties from the heel slab carry the strip reaction wu·ℓn into the counterfort; they must be anchored in the counterfort and checked separately from the shear reinforcement demand
- Not included: toe slab design, vertical bending of the face slab (restraint near the base), temperature and shrinkage reinforcement, development and lap splices, seismic earth pressure, water pressure behind the wall (good drainage assumed); overall stability is checked separately with the retaining wall tool
- Quantities: rebar weight uses the bar lengths of the core bar schedule (laps and hooks included), with the face slab horizontal bars, heel slab longitudinal bars and counterfort inclined main bars taken at the provided areas entered above; distribution bars and ties follow the schedule. Concrete includes the toe slab (toe reinforcement is not designed and not included in the rebar weight)
Frequently Asked Questions
Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.
Which design basis does this calculator apply?
Taiwan Design Code for Concrete Structures (2023; ACI 318-19 framework) Tables 6.5.2, 6.5.4, 22.5.5.1; Taiwan Soil and Water Conservation Technical Regulations Arts. 119, 120 (strip method). Section design follows the Taiwan concrete code named in the basis line (ACI 318-19 framework). External stability (sliding, overturning, bearing) is not part of this calculator. Bar sizes are D13–D36 and strengths are entered in kgf/cm².
What assumptions and limits does the calculation core state for this tool?
The strip method is a design convention: the face slab and heel slab are treated as continuous one-way slabs supported by the counterforts; moments wu·ℓn²/14 (end-span positive moment) and wu·ℓn²/10 (negative moment at the first interior support); shear 1.15·wu·ℓn/2 (Taiwan Design Code for Concrete Structures (2023) Tables 6.5.2 and 6.5.4). Table 6.5.2 applies (per 6.5.1) to continuous beams and one-way slabs under uniformly distributed gravity load; using it for lateral earth pressure strips is outside the stated scope and is engineering convention. Near the base the face slab is restrained by the base slab and acts two-way, so this method is conservative. The counterfort is designed as a rectangular section (width = counterfort thickness, face slab flange ignored); tension bars follow the sloped back edge and the required area is already divided by cos θ; no shear reduction is taken for the tapered section. Ties: horizontal ties from the face slab and vertical ties from the heel slab carry the strip reaction wu·ℓn into the counterfort; they must be anchored in the counterfort and checked separately from the shear reinforcement demand. Not included: toe slab design, vertical bending of the face slab (restraint near the base), temperature and shrinkage reinforcement, development and lap splices, seismic earth pressure, water pressure behind the wall (good drainage assumed); overall stability is checked separately with the retaining wall tool. Quantities: rebar weight uses the bar lengths of the core bar schedule (laps and hooks included), with the face slab horizontal bars, heel slab longitudinal bars and counterfort inclined main bars taken at the provided areas entered above; distribution bars and ties follow the schedule. Concrete includes the toe slab (toe reinforcement is not designed and not included in the rebar weight).
Where is the calculation performed, and can the result be sealed or submitted?
The calculation runs in your browser, in the same WebAssembly calculation core this page loads. The result is an online preview: its first line reads "[HyGeoWorks online preview - not for PE sealing or submittal]".
Can I recalculate without a network connection?
Yes. "Download the offline workbench" on this page saves one HTML file that contains the workbench and the same calculation core; opened from disk it recalculates without a network connection.
From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark
The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.
Compare all plans, including 90-day passes and perpetual licenses