Culvert Outlet Riprap Protection Calculator (Stone Size & Apron Dimensions)
Outlet protection sizing with US customary inputs (fps, ft): the calculation core applies the MOTC (Taiwan) Highway Drainage Design Code §5.13 Eq. 5-3 for the minimum stone size and the apron rules of the same section (width at least 2.5 times the channel width, length at least 5.0 times the flow depth), and reports the FHWA HEC-23 Vol. 1 Eq. 5.1 (Isbash) median riprap size D50 for reference. Blanket thickness, gradation and filter layers are not designed.
Standards and references (context for this calculation; the basis the calculator applies is the one stated below):
Design basis as reported by the calculation core: MOTC (Taiwan) Highway Drainage Design Code §5.13 Eq. 5-3 (stone size and apron dimensions); FHWA HEC-23 Vol. 1 Eq. 5.1 (Isbash D50, for reference)
Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List.
Check Summary Preview (Software Format; Auto-Populated)
| Check item | Trial value | Status |
|---|---|---|
| Min. Stone Size d | 0.376 m | Calculated value |
| Min. Apron Width W | 3.05 m | Calculated value |
| Min. Apron Length L | 4.57 m | Calculated value |
| HEC-23 Median Riprap D50 | 0.199 m | Calculated value |
Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.
Desktop edition: calculation reports and cross-module quantity reconciliation
1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).
Governing Equations (US Customary Notation) & Basis Reported by the Calculation Core
The equations and limits the calculation core applies are listed below for independent checking.
Worked Example: Riprap Apron for a 4-ft Wide Outlet at V = 10.0 fps
The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.
Determine the minimum stone size, apron width and apron length, and the HEC-23 Isbash D50 for reference, for an outlet 4.0 ft wide with a 3.0-ft flow depth discharging at V = 10.0 fps (stone specific gravity 2.65).
Every number in this example was produced by the calculation core (WebAssembly) when this page was built. The calculation core works in SI units: the US customary inputs below are converted with exact NIST SP 811 factors before the calculation, and results are shown in US customary units with the core's SI value in parentheses. Check values, criteria and calculation steps are the core's own SI output. Basis reported by the core: MOTC (Taiwan) Highway Drainage Design Code §5.13 Eq. 5-3 (stone size and apron dimensions); FHWA HEC-23 Vol. 1 Eq. 5.1 (Isbash D50, for reference)
1. Input Parameters
| Design Parameter | US Customary Value | Unit |
|---|---|---|
| Outlet Design Velocity V | 10 | ft/s |
| Culvert Span / Channel Width W | 4 | ft |
| Outlet Flow Depth D | 3 | ft |
| Stone Specific Gravity S_s | 2.65 | — |
2. Computed Results (calculation core output)
| Output | Result |
|---|---|
| Min. Stone Size d | 1.234 ft (0.376 m) |
| Min. Apron Width W | 10 ft (3.05 m) |
| Min. Apron Length L | 15 ft (4.57 m) |
| HEC-23 Median Riprap D50 | 0.6515 ft (0.199 m) |
3. Calculation Steps (calculation core output, SI units)
[HyGeoWorks online preview - not for PE sealing or submittal] d = V²/24.7 = 3.048²/24.7 = 0.376 m Min. apron width >= 2.5 * channel width = 3.05 m; min. apron length >= 5.0 * channel depth = 4.57 m FHWA HEC-23 Eq. 5.1: D50 = 0.692·V²/(2g(Ss − 1)) = 0.199 m (K = 1.0)
US customary equivalents (NIST SP 811 conversion of the SI values reported by the core above; the core summary itself is unchanged) Min. Stone Size d = 1.234 ft Min. Apron Width W = 10 ft Min. Apron Length L = 15 ft HEC-23 Median Riprap D50 = 0.6515 ft
Frequently Asked Questions (Basis, Scope & Limits)
Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.
Which equation governs the stone size? Is FHWA HEC-14 used?
HEC-14 is not used. The minimum stone size comes from the MOTC (Taiwan) Highway Drainage Design Code §5.13 Eq. 5-3 (d = V²/24.7 in SI units), and the apron width and length from the same section. The FHWA HEC-23 Vol. 1 Eq. 5.1 (Isbash) D50 is listed for reference; the worked example shows both.
Why do the two stone sizes differ?
They come from different methods: Eq. 5-3 gives a minimum stone size from velocity alone, while the Isbash expression gives a median size that also depends on the stone specific gravity. The calculator reports both and does not choose between them; use the requirement of your governing agency.
Does the calculator design the riprap thickness, gradation or filter?
No. It reports the stone size and the apron plan dimensions only. Blanket thickness, gradation, the filter layer or geotextile beneath the riprap, and the apron elevation relative to the outlet invert must be detailed separately.
How does a lighter stone (S_s below 2.65) affect the result?
Only the HEC-23 Isbash D50 depends on S_s: it scales with 1/(S_s − 1), so S_s = 2.45 instead of 2.65 raises D50 by about 14% (1.65/1.45). The minimum stone size of Eq. 5-3 does not depend on S_s.
From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark
The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.
Compare all plans, including 90-day passes and perpetual licenses