HyGeoWorks
🔒 Previews run in your browser (WebAssembly) · Inputs are sent only when you formally export
Chang (1937) Elastic Subgrade Reaction · kH & Allowable Displacement per Taiwan Codes

Laterally Loaded Pile & Drilled Shaft Calculator (Chang's Analytical Method)

Beam-on-elastic-foundation calculator (Chang 1937) for laterally loaded piles and drilled shafts with US customary inputs (ft, ksi, kip). The calculation core derives the horizontal subgrade modulus kH from the average SPT N (E0 = 28N kgf/cm², kH = kH0·(BH/0.3)^(−3/4)), and checks the head deflection against 1 cm (Taiwan Building Foundation Design Code (2023) commentary) and β·L ≥ 3 (MOTC (Taiwan) Seismic Design Code for Highway Bridges). Suitable as an independent hand check of nonlinear p-y analyses.

Standards and references (context for this calculation; the basis the calculator applies is the one stated below):

Design basis for this page ▾
Chang (1937) Elastic Subgrade Reaction Beam-on-Winkler-Foundation Analytical SolutionSubgrade modulus and allowable head displacement: Taiwan Building Foundation Design Code (2023) commentary and MOTC (Taiwan) Seismic Design Code for Highway Bridges Eq. C4-21

Design basis as reported by the calculation core: Chang (1937) Elastic Subgrade Reaction Beam-on-Winkler-Foundation Analytical Solution; subgrade modulus and allowable head displacement per Taiwan Building Foundation Design Code (2023) commentary and MOTC (Taiwan) Seismic Design Code for Highway Bridges Eq. C4-21

Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List.

Interactive US Customary Engineering Workstation
US customary inputs, shown as US (SI) in the results
Free Samples and Pricing
A public sample produced by the production service from this page's standard example and sealed with a verification code: open it in Word or AutoCAD and check it on the Verify page. Not for PE sealing or submittal.
Single-export pass: US$19 for one calculator, 3 formal exports in total within 24 hours of the first; full credit toward an upgrade within 30 days, full refund before the first export
Single-export passes (one calculator, 3 exports within 24 hours), 30-day passes, annual plans and perpetual licenses; printable quotes for purchase orders.
Formal export and the Project List are on the workbench toolbar above:
Licensed users can formally export this calculator's Word report (with a verification code and server time witness) and AutoCAD DXF drawing, or add several calculators to the free Project List and export a multi-chapter project report online, with nothing to install on a Mac. Projects with DEM terrain or GIS files can run in the heavy cloud computation or in the HydroStudio desktop edition.
The summary lists the basis, key results and check verdicts; its first line marks it as an online preview, not for PE sealing or submittal.
Download the Offline Workbench (Single HTML File, 39 Tools)
No install and no email required. It contains the same calculation core as this site; results are also a preview, not for sealed submittals.

Check Summary Preview (Software Format; Auto-Populated)

Laterally Loaded Drilled Shaft & Pile Calculator (Chang's Subgrade Method): check summary (software format)
Calculation basis: Chang (1937) Elastic Subgrade Reaction Beam-on-Winkler-Foundation Analytical Solution; subgrade modulus and allowable head displacement per Taiwan Building Foundation Design Code (2023) commentary and MOTC (Taiwan) Seismic Design Code for Highway Bridges Eq. C4-21
Check item Trial value Status
Pile Head Deflection <= 1 cm0.168 ≤ 1OK
Semi-Infinite Long Pile Criterion (β·L >= 3)7.04 ≥ 3OK

Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.

Desktop edition: calculation reports and cross-module quantity reconciliation

1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).

Desktop pricing (Pro US$990/yr) Download the desktop trial Complimentary license for agency reviewers and faculty
Scope and responsibility: This page is a single-calculator trial run; cross-module quantity reconciliation is done in desktop project runs. Problems outside this calculator's scope (see the FAQ) need an appropriate analysis method. Final submittals require review and seal by a licensed Professional Engineer.

Governing Equations (US Customary Notation) & Basis Reported by the Calculation Core

The equations and limits the calculation core applies are listed below for independent checking.

Subgrade Modulus from SPT N & Characteristic Factor β (as computed by the core)
E_0 = 28 · N [kgf/cm²], k_H0 = α · E_0 / 0.3, k_H = k_H0 · (B_H / 0.3)^(−3/4), B_H = √(D / β), β = [ k_H · D / (4 · E_c · I) ]^(1/4)
The core solves k_H and β as a coupled solution in SI units (B_H and 0.3 in m); α = 1 for the normal case. The closed-form solution assumes a long pile: β·L ≥ 3.
Closed-Form Pile-Head Deflection & Moment
Fixed head: y_0 = H / (4 · E_c · I · β³), M_0 = H / (2 · β); Free head (M_t = 0): y_0 = H / (2 · E_c · I · β³), M_max = 0.3224 · H / β
E_c · I = gross flexural stiffness (I = π·D⁴/64) used by the core; H = lateral load at the pile head.

Worked Example: 24-in. Fixed-Head RC Drilled Shaft under H = 25 kips

The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.

Compute the head deflection y_0, the head moment M_0 and β·L for a 24-in. (2.0-ft) diameter, 50-ft-long RC shaft (E_c = 3,600 ksi) with a fixed head, in soil with an average SPT N of 15 (normal case).

Every number in this example was produced by the calculation core (WebAssembly) when this page was built. The calculation core works in SI units: the US customary inputs below are converted with exact NIST SP 811 factors before the calculation, and results are shown in US customary units with the core's SI value in parentheses. Check values, criteria and calculation steps are the core's own SI output. Basis reported by the core: Chang (1937) Elastic Subgrade Reaction Beam-on-Winkler-Foundation Analytical Solution; subgrade modulus and allowable head displacement per Taiwan Building Foundation Design Code (2023) commentary and MOTC (Taiwan) Seismic Design Code for Highway Bridges Eq. C4-21

1. Input Parameters

Design ParameterUS Customary ValueUnit
Shaft / Pile Diameter D2ft
Pile Elastic Modulus E_c3600ksi
Embedded Pile Length L50ft
Average SPT N within 1/β Below the Pile Head15—
Loading ConditionNormal (α = 1, allowable displacement 1 cm)—
Lateral Shear Load H25kip
Pile-Head Fixity ConditionFixed-Head (Restrained Pile Cap)—

2. Computed Results (calculation core output)

OutputResult
Horizontal Subgrade Modulus kH319300 pcf (50162 kN/m³)
Characteristic Factor β0.4617 1/m
Pile Head Deflection y00.0661 in (0.1679 cm)
Maximum Bending Moment M_max88.83 kip·ft (120.43 kN·m)
Depth of First Zero Deflection l016.74 ft (5.10 m)
Allowable Lateral Load H_allow148.9 kip (662.3 kN)

Verification Checks (calculation core output)

Verification ItemComputed ResultGoverning Limit / CriterionStatusBasis
Pile Head Deflection <= 1 cm0.168≤ 1PASSTaiwan Building Foundation Design Code, Commentary p. 5-41
Semi-Infinite Long Pile Criterion (β·L >= 3)7.04≥ 3PASSMOTC (Taiwan) Seismic Design Code for Highway Bridges

3. Calculation Steps (calculation core output, SI units)

[HyGeoWorks online preview - not for PE sealing or submittal]
EI = Ec·πD⁴/64 = 24821.1×10³×π×0.6096⁴/64 = 168256 kN·m²
E0 = 28N kgf/cm² = 280×15 tf/m² = 41202 kPa; kH0 = α·E0/0.3 = 137340 kN/m³ (α = 1)
kH = kH0·(BH/0.3)^(−3/4), BH = √(D/β), β = (kH·D/4EI)^¼ coupled solution -> kH = 50162 kN/m³, β = 0.4617 1/m, BH = 1.149 m
Fixed-head pile: v0 = H/(4EIβ³) = 0.1679 cm; M0 = H/(2β) = 120.43 kN·m; max. below-grade moment = (H/2β)e^(−π/2) = 25.04 kN·m (at depth 3.40 m)
US customary equivalents (NIST SP 811 conversion of the SI values reported by the core above; the core summary itself is unchanged)
  Horizontal Subgrade Modulus kH = 319300 pcf
  Pile Head Deflection y0 = 0.0661 in
  Maximum Bending Moment M_max = 88.83 kip·ft
  Depth of First Zero Deflection l0 = 16.74 ft
  Allowable Lateral Load H_allow = 148.9 kip

Frequently Asked Questions (Basis, Scope & Limits)

Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.

How should Chang's linear method be used alongside nonlinear p-y programs?

Chang's solution assumes a linear subgrade (constant kH) and a long pile, so it is most meaningful at small working-load deflections. Use it as an independent order-of-magnitude check of a p-y model (for example, to catch unit errors in the input), not as a replacement for nonlinear analysis at large deflections.

What if β·L is less than 3?

The calculation core checks β·L ≥ 3 (MOTC (Taiwan) Seismic Design Code for Highway Bridges) because the closed-form solution assumes a semi-infinite pile. For shorter piles the check fails, and a short- or rigid-pile method (for example Broms) or a numerical analysis is needed.

Does the calculator reduce the stiffness for cracking?

No. The core uses the gross section (I = π·D⁴/64) with the elastic modulus you enter. If cracking is expected under the design moment, reduce the input stiffness according to your governing code or agency guidance.

Which head-deflection limit is checked?

The core checks the head deflection against 1 cm (0.39 in.) for the normal case, taken from the Taiwan Building Foundation Design Code commentary (the core's seismic case, α = 2 with 1.5 cm, is not offered on this page). Deflection limits of US agencies differ by structure type, so compare the reported deflection with your agency's limit.

USD Pricing · Checkout by Stripe · Printable USD Quotation

From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark

The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.

Monthly
Pro monthly
$119 / month
One discipline: $69 / month. Renews monthly until canceled; cancel any time before the next renewal and keep using it to the end of the paid month.
Buy monthly ($119/mo)
30 days
30-day pass
$79 / 30 days, one discipline
All modules: $135. One payment; it does not renew. The pass fee can be credited once toward an annual or perpetual license of the same discipline or a higher plan bought within 30 days after the pass ends, with the same email and in the same currency.
Buy a 30-day pass (from $79)
Quotation
Printable USD quotation
For any plan, including Firm (from 3 seats) and Enterprise (from 10 seats), which are sold only to businesses and other organizations, not to individual buyers: print the quotation or save it as a PDF for your purchasing process.
Request a printable USD quotation

Compare all plans, including 90-day passes and perpetual licenses

Checkout is processed by Stripe; a tax ID can be entered at checkout, and for one-time payments Stripe issues an invoice showing the buyer's name and tax ID. Procurement follows your organization's own rules.

Explore All 31 Tools (20 US Customary + 11 Reference: Basis Stated on Each Page)

Need to edit terrain, 2D flood models and design alternatives interactively on your computer, or see 3D views drawn from your project data? Use the HydroStudio desktop edition:
Download the Desktop Trial
No credit card or phone number is needed to download. Without a license it runs as a trial: local calculation and 3D viewing work, exported reports and drawings carry a trial watermark (not for submittal), and some built-in data libraries are limited. Plans and prices are on the Pricing page.