HyGeoWorks
🔒 Previews run in your browser (WebAssembly) · Inputs are sent only when you formally export
Green–Ampt (US EPA SWMM Vol. I) + Rawls (1983) Soils · FS(t) · Required FS per Taiwan SWC Art. 73

Transient Rainfall Infiltration & Shallow Infinite Slope Stability FS(t) Calculator

Couples time-stepping Green–Ampt / Mein–Larson rainfall infiltration (US EPA SWMM Vol. I §4.4.1; Rawls, Brakensiek & Miller (1983) texture parameters) with shallow infinite-slope limit equilibrium for saturated slope-parallel seepage (Pradel & Raad 1993). The calculation core reports the final wetting-front depth, the cumulative infiltration, the minimum FS and the time at which it occurs, and checks the minimum FS against the rainstorm-condition factor of safety of the Taiwan Soil and Water Conservation Technical Regulations Art. 73.

Standards and references (context for this calculation; the basis the calculator applies is the one stated below):

Design basis for this page ▾
US EPA SWMM Vol. I §4.4.1 (Green–Ampt); Lumb (1975) / HK GEO Manual §4.4.3; Pradel & Raad (1993)Required factor of safety: Taiwan Soil and Water Conservation Technical Regulations Art. 73 (rainstorm condition)Soil textures: Rawls, Brakensiek & Miller (1983), from the US EPA SWMM Reference Manual Vol. I Table 4-7

Design basis as reported by the calculation core: US EPA SWMM Vol. I §4.4.1 (Green–Ampt); Lumb (1975) / HK GEO Manual §4.4.3; Pradel & Raad (1993); required factor of safety per Taiwan Soil and Water Conservation Technical Regulations Art. 73 (rainstorm condition)

Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List.

Interactive US Customary Engineering Workstation
US customary inputs, shown as US (SI) in the results
Free Samples and Pricing
A public sample produced by the production service from this page's standard example and sealed with a verification code: open it in Word or AutoCAD and check it on the Verify page. Not for PE sealing or submittal.
Single-export pass: US$19 for one calculator, 3 formal exports in total within 24 hours of the first; full credit toward an upgrade within 30 days, full refund before the first export
Single-export passes (one calculator, 3 exports within 24 hours), 30-day passes, annual plans and perpetual licenses; printable quotes for purchase orders.
Formal export and the Project List are on the workbench toolbar above:
Licensed users can formally export this calculator's Word report (with a verification code and server time witness) and AutoCAD DXF drawing, or add several calculators to the free Project List and export a multi-chapter project report online, with nothing to install on a Mac. Projects with DEM terrain or GIS files can run in the heavy cloud computation or in the HydroStudio desktop edition.
The summary lists the basis, key results and check verdicts; its first line marks it as an online preview, not for PE sealing or submittal.
Download the Offline Workbench (Single HTML File, 39 Tools)
No install and no email required. It contains the same calculation core as this site; results are also a preview, not for sealed submittals.

Check Summary Preview (Software Format; Auto-Populated)

Green-Ampt Rainfall Infiltration & Infinite Slope Stability FS(t) Calculator: check summary (software format)
Calculation basis: US EPA SWMM Vol. I §4.4.1 (Green–Ampt); Lumb (1975) / HK GEO Manual §4.4.3; Pradel & Raad (1993); required factor of safety per Taiwan Soil and Water Conservation Technical Regulations Art. 73 (rainstorm condition)
Check item Trial value Status
Infinite Slope Factor of Safety (Rainfall)1.625 ≥ 1.2OK

Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.

Desktop edition: calculation reports and cross-module quantity reconciliation

1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).

Desktop pricing (Pro US$990/yr) Download the desktop trial Complimentary license for agency reviewers and faculty
Scope and responsibility: This page is a single-calculator trial run; cross-module quantity reconciliation is done in desktop project runs. Problems outside this calculator's scope (see the FAQ) need an appropriate analysis method. Final submittals require review and seal by a licensed Professional Engineer.

Governing Equations (US Customary Notation) & Basis Reported by the Calculation Core

The equations and limits the calculation core applies are listed below for independent checking.

Mein–Larson Ponding Threshold & Implicit Green–Ampt Cumulative Infiltration
F_p = (K_s · ψ · θ_d) / (i − K_s) [in.], F_2 − ψ·θ_d·ln(F_2 + ψ·θ_d) = K_s·Δt + F_1 − ψ·θ_d·ln(F_1 + ψ·θ_d)
K_s = saturated hydraulic conductivity (in./hr); ψ = wetting-front suction head (in.); θ_d = θ_e(1 − S_e); wetting-front depth z_w = (F / θ_d) / 12 [ft].
Infinite Slope Factor of Safety with Saturated Slope-Parallel Seepage
FS(t) = [ c' + (γ_sat − m · γ_w) · z_w(t) · cos²β · tanφ' ] / [ γ_sat · z_w(t) · sinβ · cosβ ]
c' = effective cohesion including any root cohesion (psf); γ_w = 62.4 pcf; m = 1 for saturated slope-parallel seepage (the worked example). The core checks the minimum FS against the Art. 73 rainstorm-condition value.

Worked Example: 30° Cut Slope in Sandy Loam under a 1.5 in./hr Storm

The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.

Track the wetting-front depth and FS(t) over a 12-hr constant-intensity storm (i = 1.50 in./hr) on a 30° slope with γ_sat = 125 pcf, c' = 150 psf and φ' = 30°, in sandy loam with an initial effective saturation of 0.40.

Every number in this example was produced by the calculation core (WebAssembly) when this page was built. The calculation core works in SI units: the US customary inputs below are converted with exact NIST SP 811 factors before the calculation, and results are shown in US customary units with the core's SI value in parentheses. Check values, criteria and calculation steps are the core's own SI output. Basis reported by the core: US EPA SWMM Vol. I §4.4.1 (Green–Ampt); Lumb (1975) / HK GEO Manual §4.4.3; Pradel & Raad (1993); required factor of safety per Taiwan Soil and Water Conservation Technical Regulations Art. 73 (rainstorm condition)

1. Input Parameters

Design ParameterUS Customary ValueUnit
Infiltration ModelGreen–Ampt / Mein–Larson—
USDA Soil Texture (Rawls 1983)Sandy Loam (Ks=0.43 in./hr, ψ=4.33 in.)—
Initial Effective Saturation S_e0.4—
Rainfall PatternConstant intensity—
Storm Rainfall Intensity i1.5in/h
Storm Duration D12h
Time Step0.5h
Slope Angle β30°
Saturated Unit Weight γ_sat125pcf
Effective Cohesion / Root c'150psf
Effective Friction Angle φ'30°
Pore Pressure in Wetted ZoneSaturated, seepage parallel to slope (m = 1)—
Slope CategoryPermanent / Long-Term—

2. Computed Results (calculation core output)

OutputResult
Final Wetting Front Depth h2.463 ft (0.751 m)
Cumulative Infiltration F7.308 in (185.6 mm)
Minimum Slope FS1.625
Time of Minimum FS12.00 h

Verification Checks (calculation core output)

Verification ItemComputed ResultGoverning Limit / CriterionStatusBasis
Infinite Slope Factor of Safety (Rainfall)1.625≥ 1.2PASSTaiwan Soil and Water Conservation Technical Regulations Art. 73 (rainstorm condition); the infiltration model is a method based on established theory (Art. 209)

3. Calculation Steps (calculation core output, SI units)

[HyGeoWorks online preview - not for PE sealing or submittal]
Green–Ampt: Ks = 10.92 mm/h, ψ = 110.0 mm, θd = θe(1 − Se) = 0.412×(1 − 0.4) = 0.2472; Pre-ponding f = i, F reaches ponding threshold Fs = Ks·ψ·θd/(i − Ks); post-ponding solved step-by-step via F2 − ψθd·ln(F2 + ψθd) = Ks·Δt + F1 − ψθd·ln(F1 + ψθd)
Wetting front depth h = F/θd; Infinite slope FS = [c' + (γsat·h·cos²β − u)·tanφ']/(γsat·h·sinβ·cosβ), u = 1·γw·h·cos²β
US customary equivalents (NIST SP 811 conversion of the SI values reported by the core above; the core summary itself is unchanged)
  Final Wetting Front Depth h = 2.463 ft
  Cumulative Infiltration F = 7.308 in
Infiltration & Slope Stability Time History FS(t) (12 rows)
t (h)i (mm/h)F (mm)h (m)FS
1.0038.129.50.1197.574
2.0038.148.20.1954.835
3.0038.164.40.2603.743
4.0038.179.50.3213.128
5.0038.193.80.3792.726
6.0038.1107.70.4362.439
7.0038.1121.20.4902.223
8.0038.1134.50.5442.053
9.0038.1147.50.5971.916
10.0038.1160.30.6491.803
11.0038.1173.00.7001.707
12.0038.1185.60.7511.625

Assumptions and Limits Stated by the Calculation Core

Frequently Asked Questions (Basis, Scope & Limits)

Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.

Why can shallow slopes fail during intense rainfall even when deep circular slip surfaces are stable?

Intense rainfall saturates the upper weathered mantle from the top down, removing matric suction and creating a shallow zone of slope-parallel seepage (u = γ_w·z_w·cos²β) long before a deep groundwater table rises. A deep circular analysis does not capture this shallow, time-dependent mechanism.

Where do the built-in soil texture parameters come from?

The calculation core holds the 11 USDA texture classes (sand through clay) of Rawls, Brakensiek & Miller (1983), transcribed from the US EPA SWMM Reference Manual Vol. I – Hydrology, Table 4-7; four of them are offered on this page. The core notes that the values are texture-class averages and should be confirmed by field tests.

How sensitive is the shallow infinite-slope FS to cohesion or root reinforcement c'?

Very sensitive at shallow wetting depths: c' is not multiplied by depth, so a modest cohesion contributes a large share of the resistance when z_w is only a few feet. Use a value of c' supported by testing and do not rely on root cohesion that may decay.

When should I move from 1D Green–Ampt screening to 2D variably saturated seepage?

When layered stratigraphy, toe drains, benched geometry or groundwater mounding govern failure. The HydroStudio desktop edition includes a 2D finite-element variably saturated seepage analysis (Richards equation) whose pore-pressure field is coupled to limit-equilibrium slope stability.

USD Pricing · Checkout by Stripe · Printable USD Quotation

From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark

The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.

Monthly
Pro monthly
$119 / month
One discipline: $69 / month. Renews monthly until canceled; cancel any time before the next renewal and keep using it to the end of the paid month.
Buy monthly ($119/mo)
30 days
30-day pass
$79 / 30 days, one discipline
All modules: $135. One payment; it does not renew. The pass fee can be credited once toward an annual or perpetual license of the same discipline or a higher plan bought within 30 days after the pass ends, with the same email and in the same currency.
Buy a 30-day pass (from $79)
Quotation
Printable USD quotation
For any plan, including Firm (from 3 seats) and Enterprise (from 10 seats), which are sold only to businesses and other organizations, not to individual buyers: print the quotation or save it as a PDF for your purchasing process.
Request a printable USD quotation

Compare all plans, including 90-day passes and perpetual licenses

Checkout is processed by Stripe; a tax ID can be entered at checkout, and for one-time payments Stripe issues an invoice showing the buyer's name and tax ID. Procurement follows your organization's own rules.

Explore All 31 Tools (20 US Customary + 11 Reference: Basis Stated on Each Page)

Need to edit terrain, 2D flood models and design alternatives interactively on your computer, or see 3D views drawn from your project data? Use the HydroStudio desktop edition:
Download the Desktop Trial
No credit card or phone number is needed to download. Without a license it runs as a trial: local calculation and 3D viewing work, exported reports and drawings carry a trial watermark (not for submittal), and some built-in data libraries are limited. Plans and prices are on the Pricing page.