Road Alignment Check (Sight Distance, Curve Radius, Grade, Vertical Curve)
Stopping sight distance, minimum horizontal curve radius, minimum transition curve length, maximum grade and crest / sag vertical curve length for the selected design speed, checked against either the allowable or the recommended values of the code.
Design basis as reported by the calculation core: MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) Tables 3.2, 3.3.1.1, 3.4, 3.10.2, 3.13; Taiwan Farm Road Design Code (amended 2019-10-28)
All tabulated limits come from the Taiwan highway and farm road design codes named in the basis line. They are not AASHTO Green Book, DMRB or Austroads values; use the result as a reference calculation and check the standards of your own authority.
Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List.
Check Summary Preview (Software Format; Auto-Populated)
| Check item | Trial value | Status |
|---|---|---|
| Available sight distance ≥ required stopping sight distance | 90.0 m ≥ 70.0 m | OK |
| Grade 0-50 m | 3.00% ≤ 8.00% | OK |
| Grade 50-100 m | 2.00% ≤ 8.00% | OK |
| Crest vertical curve length (PVI at 50 m, grade difference 5.00%) | 100.00 m ≥ 65.00 m | OK |
| Horizontal curve C1 radius | 150.00 m ≥ 120.00 m | OK |
| Horizontal curve C1 spiral length | 75.00 m ≥ 38.30 m | OK |
Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.
Desktop edition: calculation reports and cross-module quantity reconciliation
1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).
Standard example (calculation core defaults)
The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.
The standard example uses the default inputs of the calculation core. Every number below was produced by the core when this page was built; nothing on this page is computed by hand.
Every number in this example was produced by the calculation core (WebAssembly) when this page was built. This calculator computes to the documents named in its basis line and works in SI units; use the unit button in the calculator to view US customary equivalents. Basis reported by the core: MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) Tables 3.2, 3.3.1.1, 3.4, 3.10.2, 3.13; Taiwan Farm Road Design Code (amended 2019-10-28)
1. Input Parameters
| Design Parameter | Value | Unit |
|---|---|---|
| Road Category | Highway (Taiwan Highway Route Design Code) | — |
| Design Speed Vd (km/h) | 60 km/h | — |
| Maximum Superelevation emax | 8% (0.08) | — |
| Check Against Recommended Values | No | — |
| Horizontal Curve Radius R | 150 | m |
| Transition Curve Length Ls | 75 | m |
| Available Stopping Sight Distance S | 90 | m |
| Approach Grade G1 | 3 | % |
| Departure Grade G2 | -2 | % |
| Vertical Curve Length Lv | 100 | m |
2. Computed Results (calculation core output)
| Output | Result |
|---|---|
| Required stopping sight distance | 70.0 m |
| Minimum horizontal curve radius Rmin | 120.0 m |
| Maximum grade | 8.00 % |
| Provided vertical curve K = Lv/ΔG | 20.00 m/% |
| Required vertical curve length | 65.0 m |
Verification Checks (calculation core output)
| Verification Item | Computed Result | Governing Limit / Criterion | Status | Basis |
|---|---|---|---|---|
| Available sight distance ≥ required stopping sight distance | 90.0 m | ≥ 70.0 m | PASS | MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) Table 3.3.1.1 |
| Grade 0-50 m | 3.00% | ≤ 8.00% | PASS | MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) (maximum grade) |
| Grade 50-100 m | 2.00% | ≤ 8.00% | PASS | MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) (maximum grade) |
| Crest vertical curve length (PVI at 50 m, grade difference 5.00%) | 100.00 m | ≥ 65.00 m | PASS | MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) (Lv = K·ΔG, and not less than the minimum vertical curve length) |
| Horizontal curve C1 radius | 150.00 m | ≥ 120.00 m | PASS | MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) (minimum curve radius) |
| Horizontal curve C1 spiral length | 75.00 m | ≥ 38.30 m | PASS | MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) 3.6.1 (Ls ≥ Vd³/(47·J·R); radius 500 m or more may omit the spiral) |
3. Calculation Steps (calculation core output, SI units)
[HyGeoWorks online preview - not for PE sealing or submittal] Design speed Vd = 60 km/h (checked against allowable values); grades G1 = 3.00%, G2 = -2.00%, grade difference ΔG = 5.00% (crest vertical curve)
Assumptions and Limits Stated by the Calculation Core
- Check values are taken from MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) (tabulated values); the minimum radii in Table 3.4 are not a consistent rounding of Vd²/(127(emax + fs)), so the tabulated values govern
- Sight distance is a comparison of the entered available sight distance with the tabulated value; sight lines are not computed from the horizontal and vertical geometry. Passing sight distance, superelevation runoff, composite grade, grade length limits and curve widening are not checked. PVI stations are derived from the vertical curve length (each adjacent tangent is half the curve length and not less than 50 m)
Frequently Asked Questions
Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.
Which design basis does this calculator apply?
MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) Tables 3.2, 3.3.1.1, 3.4, 3.10.2, 3.13; Taiwan Farm Road Design Code (amended 2019-10-28). All tabulated limits come from the Taiwan highway and farm road design codes named in the basis line. They are not AASHTO Green Book, DMRB or Austroads values; use the result as a reference calculation and check the standards of your own authority.
What assumptions and limits does the calculation core state for this tool?
Check values are taken from MOTC (Taiwan) Highway Route Design Code (2026-07 ed.) (tabulated values); the minimum radii in Table 3.4 are not a consistent rounding of Vd²/(127(emax + fs)), so the tabulated values govern. Sight distance is a comparison of the entered available sight distance with the tabulated value; sight lines are not computed from the horizontal and vertical geometry. Passing sight distance, superelevation runoff, composite grade, grade length limits and curve widening are not checked. PVI stations are derived from the vertical curve length (each adjacent tangent is half the curve length and not less than 50 m).
Where is the calculation performed, and can the result be sealed or submitted?
The calculation runs in your browser, in the same WebAssembly calculation core this page loads. The result is an online preview: its first line reads "[HyGeoWorks online preview - not for PE sealing or submittal]".
Can I recalculate without a network connection?
Yes. "Download the offline workbench" on this page saves one HTML file that contains the workbench and the same calculation core; opened from disk it recalculates without a network connection.
From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark
The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.
Compare all plans, including 90-day passes and perpetual licenses