Open Channel Normal Depth (y_n) & Critical Depth (y_c) Calculator
Solves the uniform normal depth y_n and the critical depth y_c (Q²T/(gA³) = 1) for a design discharge in trapezoidal, rectangular or circular sections; US customary inputs are converted to the SI calculation core. When a lining is selected, the core checks the velocity against the minimum and maximum velocities of the Taiwan Soil and Water Conservation Technical Regulations Art. 85 (the worked example uses concrete without perennial flow). Freeboard and boundary shear stress are not computed.
Standards and references (context for this calculation; the basis the calculator applies is the one stated below):
Design basis as reported by the calculation core: Manning Uniform Flow & Critical Depth Q²T/(gA³) = 1; velocity limits (when a lining is selected) per Taiwan Soil and Water Conservation Technical Regulations Art. 85
Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List.
Check Summary Preview (Software Format; Auto-Populated)
| Check item | Trial value | Status |
|---|---|---|
| Min. Non-Silting Velocity | 2.504 m/s ≥ 0.8 m/s | OK |
| Max. Permissible Velocity | 2.504 m/s ≤ 6.1 m/s | OK |
Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.
Desktop edition: calculation reports and cross-module quantity reconciliation
1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).
Governing Equations (US Customary Notation) & Basis Reported by the Calculation Core
The equations and limits the calculation core applies are listed below for independent checking.
Worked Example: Concrete Trapezoidal Ditch Normal & Critical Depth (Q = 150 cfs)
The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.
Compute normal depth y_n, critical depth y_c, velocity and Froude number for a 6.0-ft bottom-width concrete trapezoidal ditch (2H:1V, n = 0.015) carrying 150 cfs at S = 0.005 ft/ft, with the Art. 85 velocity checks for a concrete lining without perennial flow.
Every number in this example was produced by the calculation core (WebAssembly) when this page was built. The calculation core works in SI units: the US customary inputs below are converted with exact NIST SP 811 factors before the calculation, and results are shown in US customary units with the core's SI value in parentheses. Check values, criteria and calculation steps are the core's own SI output. Basis reported by the core: Manning Uniform Flow & Critical Depth Q²T/(gA³) = 1; velocity limits (when a lining is selected) per Taiwan Soil and Water Conservation Technical Regulations Art. 85
1. Input Parameters
| Design Parameter | US Customary Value | Unit |
|---|---|---|
| Channel Cross-Section | Trapezoidal Channel | — |
| Bottom Width b | 6 | ft |
| Side Slope z (zH:1V) | 2 | — |
| Manning's Roughness n | 0.015 | — |
| Longitudinal Bed Slope S | 0.005 | m/m |
| Design Discharge Q | 150 | cfs |
| Channel Lining Material | Concrete or concrete block masonry | — |
| Perennial Flow | No | — |
2. Computed Results (calculation core output)
| Output | Result |
|---|---|
| Normal Depth yn | 1.873 ft (0.5710 m) |
| Flow Velocity V | 8.215 ft/s (2.504 m/s) |
| Froude Number Fr | 1.245 |
| Critical Depth yc | 2.114 ft (0.6443 m) |
Verification Checks (calculation core output)
| Verification Item | Computed Result | Governing Limit / Criterion | Status | Basis |
|---|---|---|---|---|
| Min. Non-Silting Velocity | 2.504 m/s | ≥ 0.8 m/s | PASS | Taiwan Soil and Water Conservation Technical Regulations Art. 85, item 1 (minimum velocity) |
| Max. Permissible Velocity | 2.504 m/s | ≤ 6.1 m/s | PASS | Taiwan Soil and Water Conservation Technical Regulations Art. 85, item 2(2)1 (maximum velocity for concrete, no perennial flow) |
3. Calculation Steps (calculation core output, SI units)
[HyGeoWorks online preview - not for PE sealing or submittal] Section: Trapezoidal b = 1.829 m, side slope 1:2; n = 0.015, S = 0.005, Q = 4.24753 m³/s Normal depth: solve y for Q(y) = A·R^(2/3)·S^(1/2)/n = 4.24753 → yn = 0.5710 m A = (b + z·y)·y = (1.8288 + 2×0.5710)×0.5710 = 1.69642 m² P = b + 2y·√(1 + z²) = 1.8288 + 2×0.5710×√(1 + 2²) = 4.38249 m T = b + 2z·y = 4.11289 m V = Q/A = 4.24753/1.69642 = 2.5038 m/s Fr = V/√(g·A/T) = 1.245 (Supercritical) Critical depth: Q²·T/(g·A³) = 1 → yc = 0.6443 m (yn ≤ yc)
US customary equivalents (NIST SP 811 conversion of the SI values reported by the core above; the core summary itself is unchanged) Normal Depth yn = 1.873 ft Flow Velocity V = 8.215 ft/s Critical Depth yc = 2.114 ft
Frequently Asked Questions (Basis, Scope & Limits)
Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.
How does comparing normal depth y_n and critical depth y_c identify the slope type?
When y_n > y_c (Fr < 1) the channel slope is hydraulically mild (M1/M2/M3 profiles) and the water surface is controlled from downstream. When y_n < y_c (Fr > 1) the slope is steep (S1/S2/S3 profiles), the control is upstream and a hydraulic jump may form where the flow meets a downstream control.
Which velocity limits does the calculator check? Are they taken from a US drainage manual?
No US manual values are used. When a lining is selected, the calculation core checks the velocity against the minimum (non-silting) velocity and the maximum permissible velocity for that lining given in the Taiwan Soil and Water Conservation Technical Regulations Art. 85; the check rows of the worked example show the limits and the article items. The core does not compute boundary shear stress, so tractive-force design of grass or riprap linings must be checked separately with the method your agency requires.
What happens if Q exceeds the full-pipe capacity of a circular pipe?
A free-surface normal depth no longer exists and the conduit flows under pressure; the hydraulic grade line must then be computed with the energy equation rather than with open-channel Manning depth.
Can I continue this channel in the HydroStudio desktop edition?
Yes. 'Export .toml' in the calculator writes a project settings file that opens in the HydroStudio desktop edition; fields the online tool does not cover are marked with placeholder notes and must be completed before calculating. The desktop edition includes standard-step gradually varied flow computation and DXF drawing output.
From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark
The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.
Compare all plans, including 90-day passes and perpetual licenses