HyGeoWorks
🔒 Previews run in your browser (WebAssembly) · Inputs are sent only when you formally export
Orifice & Rectangular Weir Sizing · Rounded Down to Cap the Release

Stormwater Detention Orifice & Rectangular Weir Sizing Calculator

Outlet sizing for detention basins and vaults: the calculation core solves the orifice equation Q = N·Cd·(πD²/4)·√(2g(H − D/2)) or the rectangular weir equation Q = Cw·L·H^1.5 for the size that passes the allowable release, rounds the size down to your increment and reports the actual outflow of the adopted size.

Standards and references (context for this calculation; the basis the calculator applies is the one stated below):

Design basis for this page ▾
Orifice Q = Cd·A·√(2gH) & Sharp/Broad-Crested Rectangular Weir Q = Cw·L·H^1.5

Design basis as reported by the calculation core: Orifice Q = Cd·A·√(2gH) & Sharp/Broad-Crested Rectangular Weir Q = Cw·L·H^1.5

Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List; 3D schematic: fixed example, not drawn from your inputs.

Interactive US Customary Engineering Workstation
US customary inputs, shown as US (SI) in the results
Free Samples and Pricing
A public sample produced by the production service from this page's standard example and sealed with a verification code: open it in Word or AutoCAD and check it on the Verify page. Not for PE sealing or submittal.
Single-export pass: US$19 for one calculator, 3 formal exports in total within 24 hours of the first; full credit toward an upgrade within 30 days, full refund before the first export
Single-export passes (one calculator, 3 exports within 24 hours), 30-day passes, annual plans and perpetual licenses; printable quotes for purchase orders.
Formal export and the Project List are on the workbench toolbar above:
Licensed users can formally export this calculator's Word report (with a verification code and server time witness) and AutoCAD DXF drawing, or add several calculators to the free Project List and export a multi-chapter project report online, with nothing to install on a Mac. Projects with DEM terrain or GIS files can run in the heavy cloud computation or in the HydroStudio desktop edition.
The summary lists the basis, key results and check verdicts; its first line marks it as an online preview, not for PE sealing or submittal.
Download the Offline Workbench (Single HTML File, 39 Tools)
No install and no email required. It contains the same calculation core as this site; results are also a preview, not for sealed submittals.

Check Summary Preview (Software Format; Auto-Populated)

Detention Outlet Orifice & Weir Sizing Calculator (US Customary): check summary (software format)
Calculation basis: Orifice Q = Cd·A·√(2gH) & Sharp/Broad-Crested Rectangular Weir Q = Cw·L·H^1.5
Check item Trial value Status
Required Orifice Diameter D_req0.3993 mCalculated value
Adopted Orifice Diameter D0.381 mCalculated value
Actual Outflow Q0.3878 m³/sCalculated value

Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.

Desktop edition: calculation reports and cross-module quantity reconciliation

1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).

Desktop pricing (Pro US$990/yr) Download the desktop trial Complimentary license for agency reviewers and faculty
Scope and responsibility: This page is a single-calculator trial run; cross-module quantity reconciliation is done in desktop project runs. Problems outside this calculator's scope (see the FAQ) need an appropriate analysis method. Final submittals require review and seal by a licensed Professional Engineer.

Governing Equations (US Customary Notation) & Basis Reported by the Calculation Core

The equations and limits the calculation core applies are listed below for independent checking.

Circular Orifice Equation (Head to the Orifice Centroid)
Q_o = N · C_d · (π · D² / 4) · √[ 2 · g · (H − D / 2) ] [cfs] (for H ≥ D)
H = water depth above the orifice invert (ft); H − D/2 = head to the orifice centroid (ft); g = 32.174 ft/s².
Rectangular Weir Equation
Q_w = C_w · L · H^(3/2) [cfs]
C_w in US units (ft^0.5/s) is converted to SI for the core (1 ft^0.5/s = 0.5521 m^0.5/s); L = crest length (ft).

Worked Example: Single Circular Orifice for Q_allow = 15.0 cfs at 6.0 ft Head

The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.

Size a single sharp-edged circular orifice (C_d = 0.60) with 6.0 ft of head above the orifice invert so that the outflow does not exceed 15.0 cfs, rounded down to a 0.25-ft increment.

Every number in this example was produced by the calculation core (WebAssembly) when this page was built. The calculation core works in SI units: the US customary inputs below are converted with exact NIST SP 811 factors before the calculation, and results are shown in US customary units with the core's SI value in parentheses. Check values, criteria and calculation steps are the core's own SI output. Basis reported by the core: Orifice Q = Cd·A·√(2gH) & Sharp/Broad-Crested Rectangular Weir Q = Cw·L·H^1.5

1. Input Parameters

Design ParameterUS Customary ValueUnit
Outlet Control TypeCircular Orifice—
Max Allowable Release Q_allow15cfs
Design Head H (above Invert/Crest)6ft
Orifice Coefficient C_d0.6—
Number of Orifices N1—
Fabrication Increment (Round Down)0.25ft

2. Computed Results (calculation core output)

OutputResult
Required Orifice Diameter D_req1.31 ft (0.3993 m)
Adopted Orifice Diameter D1.25 ft (0.381 m)
Actual Outflow Q13.7 cfs (0.3878 m³/s)

3. Calculation Steps (calculation core output, SI units)

[HyGeoWorks online preview - not for PE sealing or submittal]
Submerged / full orifice flow: Q = N·Cd·(πD²/4)·√(2g(H − D/2)), N = 1, Cd = 0.6, H = 1.8288 m → D = 0.3993 m (check Q = 0.4248 m³/s)
Adopt D = 0.381 m (to the nearest 0.0762 m, rounded down) -> Q = 0.3878 m³/s ≤ 0.424753
US customary equivalents (NIST SP 811 conversion of the SI values reported by the core above; the core summary itself is unchanged)
  Required Orifice Diameter D_req = 1.31 ft
  Adopted Orifice Diameter D = 1.25 ft
  Actual Outflow Q = 13.7 cfs

Frequently Asked Questions (Basis, Scope & Limits)

Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.

Why does this tool round the orifice size down while pipe sizing rounds up?

A conveyance pipe is rounded up so that its capacity is at least the design flow. A detention outlet limits the release, so the size is rounded down: the adopted size passes an outflow no greater than the allowable release. The worked example lists the actual outflow of the adopted orifice.

Why use (H − D/2) instead of H in the orifice equation?

H is entered relative to the orifice invert (bottom edge), which is how stage-storage-discharge tables are usually set up. Subtracting D/2 refers the head to the centroid of the circular opening.

Is there a minimum orifice size?

The calculator applies none. Small orifices clog easily; minimum sizes and trash-rack requirements are set by local stormwater manuals, so check the adopted diameter against your agency's rule.

Can the HydroStudio desktop edition route a detention pond through the outlet?

Yes. The HydroStudio desktop edition includes level-pool routing of detention storage through orifice and weir outlets, with a time-varying downstream water level (submergence) and flap gates. Verification cases are listed on the Benchmarks page.

USD Pricing · Checkout by Stripe · Printable USD Quotation

From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark

The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.

Monthly
Pro monthly
$119 / month
One discipline: $69 / month. Renews monthly until canceled; cancel any time before the next renewal and keep using it to the end of the paid month.
Buy monthly ($119/mo)
30 days
30-day pass
$79 / 30 days, one discipline
All modules: $135. One payment; it does not renew. The pass fee can be credited once toward an annual or perpetual license of the same discipline or a higher plan bought within 30 days after the pass ends, with the same email and in the same currency.
Buy a 30-day pass (from $79)
Quotation
Printable USD quotation
For any plan, including Firm (from 3 seats) and Enterprise (from 10 seats), which are sold only to businesses and other organizations, not to individual buyers: print the quotation or save it as a PDF for your purchasing process.
Request a printable USD quotation

Compare all plans, including 90-day passes and perpetual licenses

Checkout is processed by Stripe; a tax ID can be entered at checkout, and for one-time payments Stripe issues an invoice showing the buyer's name and tax ID. Procurement follows your organization's own rules.

Explore All 31 Tools (20 US Customary + 11 Reference: Basis Stated on Each Page)

Need to edit terrain, 2D flood models and design alternatives interactively on your computer, or see 3D views drawn from your project data? Use the HydroStudio desktop edition:
Download the Desktop Trial
No credit card or phone number is needed to download. Without a license it runs as a trial: local calculation and 3D viewing work, exported reports and drawings carry a trial watermark (not for submittal), and some built-in data libraries are limited. Plans and prices are on the Pricing page.