HyGeoWorks
🔒 Previews run in your browser (WebAssembly) · Inputs are sent only when you formally export
Manning · V_max per Taiwan SWC Art. 85 or User Value · Drop Layout per SWC Handbook §2.20

Steep Roadside Channel & Stepped Check-Drop Layout Calculator

Solves the slope-flattening and series check-drop layout of steep ditches with US customary inputs (ft, cfs, fps). The calculation core finds the reach slope at which the Manning velocity equals the maximum permissible velocity (from the Taiwan Soil and Water Conservation Technical Regulations Art. 85 when a lining is selected, or the value you enter), sets the drop height at your drop spacing per the Taiwan Soil and Water Conservation Handbook §2.20, and counts the drops over the reach.

Standards and references (context for this calculation; the basis the calculator applies is the one stated below):

Design basis for this page ▾
Manning Uniform Flow; maximum permissible velocity per Taiwan Soil and Water Conservation Technical Regulations Art. 85 (the worked example uses a user-specified value)Drop layout: Taiwan Soil and Water Conservation Handbook, Engineering Part §2.20

Design basis as reported by the calculation core: Manning Uniform Flow; maximum permissible velocity per Taiwan Soil and Water Conservation Technical Regulations Art. 85; drop layout per Taiwan Soil and Water Conservation Handbook, Engineering Part §2.20

Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List.

Interactive US Customary Engineering Workstation
US customary inputs, shown as US (SI) in the results
Free Samples and Pricing
A public sample produced by the production service from this page's standard example and sealed with a verification code: open it in Word or AutoCAD and check it on the Verify page. Not for PE sealing or submittal.
Single-export pass: US$19 for one calculator, 3 formal exports in total within 24 hours of the first; full credit toward an upgrade within 30 days, full refund before the first export
Single-export passes (one calculator, 3 exports within 24 hours), 30-day passes, annual plans and perpetual licenses; printable quotes for purchase orders.
Formal export and the Project List are on the workbench toolbar above:
Licensed users can formally export this calculator's Word report (with a verification code and server time witness) and AutoCAD DXF drawing, or add several calculators to the free Project List and export a multi-chapter project report online, with nothing to install on a Mac. Projects with DEM terrain or GIS files can run in the heavy cloud computation or in the HydroStudio desktop edition.
The summary lists the basis, key results and check verdicts; its first line marks it as an online preview, not for PE sealing or submittal.
Download the Offline Workbench (Single HTML File, 39 Tools)
No install and no email required. It contains the same calculation core as this site; results are also a preview, not for sealed submittals.

Check Summary Preview (Software Format; Auto-Populated)

Stepped Chute & Steep Channel Check-Drop Spacing Calculator (US Customary): check summary (software format)
Calculation basis: Manning Uniform Flow; maximum permissible velocity per Taiwan Soil and Water Conservation Technical Regulations Art. 85; drop layout per Taiwan Soil and Water Conservation Handbook, Engineering Part §2.20
Check item Trial value Status
Mild-Reach Flow Velocity3.046 m/s ≤ 3.048 m/sOK

Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.

Desktop edition: calculation reports and cross-module quantity reconciliation

1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).

Desktop pricing (Pro US$990/yr) Download the desktop trial Complimentary license for agency reviewers and faculty
Scope and responsibility: This page is a single-calculator trial run; cross-module quantity reconciliation is done in desktop project runs. Problems outside this calculator's scope (see the FAQ) need an appropriate analysis method. Final submittals require review and seal by a licensed Professional Engineer.

Governing Equations (US Customary Notation) & Basis Reported by the Calculation Core

The equations and limits the calculation core applies are listed below for independent checking.

Flattened Reach Slope & Series Drop Height (as computed by the core)
Find S_b such that V(Q, S_b) = V_max; H_drop = (S_0 − S_b) · s rounded up to 1 cm; S_b,adopted = S_0 − H_drop / s; N_drops = ceil(L / s)
S_0 = natural ground grade (ft/ft); S_b = flattened channel grade between drops (ft/ft); s = drop spacing (ft). The core works in SI, so the drop height is rounded up to the next centimeter.
Link to Individual Drop Basin Sizing
Use the computed H_drop with Q and the channel width in the Drop Structure & Stilling Basin Calculator
The core's note gives the drop height to carry into the drop structure tool.

Worked Example: Check Drops on a 300-ft Ditch at a 10% Grade (Q = 40 cfs)

The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.

A concrete trapezoidal ditch (b = 4.0 ft, 1.5H:1V, n = 0.015) on a 10.0% grade carries Q = 40 cfs. Limit the reach velocity to a user-specified V_max of 10.0 fps using check drops spaced every 50 ft over a 300-ft reach.

Every number in this example was produced by the calculation core (WebAssembly) when this page was built. The calculation core works in SI units: the US customary inputs below are converted with exact NIST SP 811 factors before the calculation, and results are shown in US customary units with the core's SI value in parentheses. Check values, criteria and calculation steps are the core's own SI output. Basis reported by the core: Manning Uniform Flow; maximum permissible velocity per Taiwan Soil and Water Conservation Technical Regulations Art. 85; drop layout per Taiwan Soil and Water Conservation Handbook, Engineering Part §2.20

1. Input Parameters

Design ParameterUS Customary ValueUnit
Channel Cross-SectionTrapezoidal Ditch—
Bottom Width b4ft
Side Slope z (zH:1V)1.5—
Manning's Roughness n0.015—
Existing Ground Grade S_00.1m/m
Design Discharge Q40cfs
Channel Lining MaterialCustom maximum permissible velocity—
Max Permissible Velocity V_max10ft/s
Perennial FlowNo—
Station Spacing Between Drops s50ft
Total Steep Reach Length L300ft

2. Computed Results (calculation core output)

OutputResult
Number of Drops6 units
Unchecked Ground-Slope Velocity17.13 ft/s (5.220 m/s)
Mild-Reach Bed Slope Sb0.02060 m/m
Unit Drop Height H3.97 ft (1.21 m)
Mild-Reach Normal Depth yn0.7753 ft (0.2363 m)
Mild-Reach Velocity V9.992 ft/s (3.046 m/s)

Verification Checks (calculation core output)

Verification ItemComputed ResultGoverning Limit / CriterionStatusBasis
Mild-Reach Flow Velocity3.046 m/s≤ 3.048 m/sPASSUser-specified

3. Calculation Steps (calculation core output, SI units)

[HyGeoWorks online preview - not for PE sealing or submittal]
Section: Trapezoidal b = 1.219 m, side slope 1:1.5; n = 0.015, Q = 1.13267 m³/s; Max. Permissible Velocity Vmax = 3.048 m/s (User-specified)
Natural slope S0 = 0.1: V = 5.220 m/s > Vmax (drop cascade required)
Mild-reach slope: solve Sb for V(Sb) = Vmax -> unit drop height H = ceil_cm((S0 - Sb)*s) = 1.21 m
Sb = S0 − H/s = 0.1 − 1.21/15.24 = 0.02060; mild-reach yn = 0.2363 m, V = 3.046 m/s
Drop count = ceil(channel length / spacing) = 6
US customary equivalents (NIST SP 811 conversion of the SI values reported by the core above; the core summary itself is unchanged)
  Unchecked Ground-Slope Velocity = 17.13 ft/s
  Unit Drop Height H = 3.97 ft
  Mild-Reach Normal Depth yn = 0.7753 ft
  Mild-Reach Velocity V = 9.992 ft/s

Assumptions and Limits Stated by the Calculation Core

Frequently Asked Questions (Basis, Scope & Limits)

Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.

Why break a steep ditch into flatter reaches with check drops?

On a steep grade the unchecked velocity can be far above what the lining tolerates; the worked example reports the unchecked ground-slope velocity next to the flattened-reach velocity. Flattening the reaches between drops keeps the velocity at or below V_max and concentrates the energy loss at the drops, where it can be dissipated.

How do I choose the spacing between check drops?

Closer spacing gives lower individual drops and smaller drop structures; wider spacing gives fewer but higher drops. Try several spacings in the calculator and check each resulting drop height in the Drop Structure calculator, which limits a single drop to 3 m (9.84 ft).

Where does V_max come from?

This page uses the value you enter (10.0 fps in the worked example); enter the limit your agency sets for your lining. When the calculation core is given a lining type instead (not offered on this form), it applies the maximum permissible velocity of the Taiwan Soil and Water Conservation Technical Regulations Art. 85 for that lining.

Can I size the individual drop structures after running this layout?

Yes — take the computed drop height and open the Drop Structure & Stilling Basin Calculator (/us/tools/drop-structure/) to obtain the basin length, sill heights, wingwall widths and minimum RC slab thickness.

USD Pricing · Checkout by Stripe · Printable USD Quotation

From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark

The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.

Monthly
Pro monthly
$119 / month
One discipline: $69 / month. Renews monthly until canceled; cancel any time before the next renewal and keep using it to the end of the paid month.
Buy monthly ($119/mo)
30 days
30-day pass
$79 / 30 days, one discipline
All modules: $135. One payment; it does not renew. The pass fee can be credited once toward an annual or perpetual license of the same discipline or a higher plan bought within 30 days after the pass ends, with the same email and in the same currency.
Buy a 30-day pass (from $79)
Quotation
Printable USD quotation
For any plan, including Firm (from 3 seats) and Enterprise (from 10 seats), which are sold only to businesses and other organizations, not to individual buyers: print the quotation or save it as a PDF for your purchasing process.
Request a printable USD quotation

Compare all plans, including 90-day passes and perpetual licenses

Checkout is processed by Stripe; a tax ID can be entered at checkout, and for one-time payments Stripe issues an invoice showing the buyer's name and tax ID. Procurement follows your organization's own rules.

Explore All 31 Tools (20 US Customary + 11 Reference: Basis Stated on Each Page)

Need to edit terrain, 2D flood models and design alternatives interactively on your computer, or see 3D views drawn from your project data? Use the HydroStudio desktop edition:
Download the Desktop Trial
No credit card or phone number is needed to download. Without a license it runs as a trial: local calculation and 3D viewing work, exported reports and drawings carry a trial watermark (not for submittal), and some built-in data libraries are limited. Plans and prices are on the Pricing page.