Box Culvert Structural Design (Closed Frame, Load Factor Design)
Loads on single- and multi-cell reinforced concrete box culverts (fill, two lateral earth pressure cases, HS20-44 distributed through fill, internal water, groundwater), closed-frame force envelopes, reinforcement, crack control and flotation.
Design basis as reported by the calculation core: MOTC (Taiwan) Highway Bridge Design Code, load factor design with HS20-44 (legacy LFD method; not AASHTO LRFD / HL-93)
Loads, load factors and reinforcement follow the Taiwan code named in the basis line (load factor design, HS20-44). This is a Taiwan-code calculation offered for reference: bar sizes are D13–D32 and strengths are entered in kgf/cm².
Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List; 3D schematic: fixed example, not drawn from your inputs.
Check Summary Preview (Software Format; Auto-Populated)
| Check item | Trial value | Status |
|---|---|---|
| Top slab Outer face: φMn ≥ Mu, minimum steel and crack control | 40.92 kN·m/m ≥ 28.61 | OK |
| Top slab Inner face: φMn ≥ Mu, minimum steel and crack control | 73.96 kN·m/m ≥ 64.44 | OK |
| Top slab: φVc ≥ Vu | 270.18 kN/m ≥ 88.29 | OK |
| Bottom slab Outer face: φMn ≥ Mu, minimum steel and crack control | 40.24 kN·m/m ≥ 29.74 | OK |
| Bottom slab Inner face: φMn ≥ Mu, minimum steel and crack control | 73.96 kN·m/m ≥ 61.75 | OK |
| Bottom slab: φVc ≥ Vu | 242.46 kN/m ≥ 94.10 | OK |
Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.
Desktop edition: calculation reports and cross-module quantity reconciliation
1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).
Standard example (calculation core defaults)
The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.
The standard example uses the default inputs of the calculation core. Every number below was produced by the core when this page was built; nothing on this page is computed by hand.
Every number in this example was produced by the calculation core (WebAssembly) when this page was built. This calculator computes to the documents named in its basis line and works in SI units; use the unit button in the calculator to view US customary equivalents. Basis reported by the core: MOTC (Taiwan) Highway Bridge Design Code, load factor design with HS20-44 (legacy LFD method; not AASHTO LRFD / HL-93)
1. Input Parameters
| Design Parameter | Value | Unit |
|---|---|---|
| Number of Cells | Single cell | — |
| Clear Width per Cell | 3 | m |
| Clear Height | 2.5 | m |
| Top Slab Thickness | 0.3 | m |
| Bottom Slab Thickness | 0.3 | m |
| Side Wall Thickness | 0.3 | m |
| Fill Depth | 1.2 | m |
| Live Load | HS20-44 | — |
| Design Internal Water Depth | (blank) | m |
| External Groundwater Level | (blank) | m |
| Flotation Criterion | Designer-specified | — |
| Required Flotation Safety Factor | (blank) | — |
| Concrete Strength f'c | 280 | kgf/cm² |
| Rebar Yield Strength fy | 4200 | kgf/cm² |
| Exposure Condition | Moderate exposure (z ≤ 30,300 kgf/cm) | — |
| Bar Size | Selected by program | — |
| Culvert Length | (blank) | m |
2. Computed Results (calculation core output)
| Output | Result |
|---|---|
| Top slab midspan Mu (inner face tension) | 64.44 kN·m/m |
| Side wall Mu (outer face tension) | 38.96 kN·m/m |
| Rebar weight (estimate) | 167.0 kg/m |
| Concrete | 3.660 m³/m |
Verification Checks (calculation core output)
| Verification Item | Computed Result | Governing Limit / Criterion | Status | Basis |
|---|---|---|---|---|
| Top slab Outer face: φMn ≥ Mu, minimum steel and crack control | 40.92 kN·m/m | ≥ 28.61 | PASS | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Top slab Inner face: φMn ≥ Mu, minimum steel and crack control | 73.96 kN·m/m | ≥ 64.44 | PASS | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Top slab: φVc ≥ Vu | 270.18 kN/m | ≥ 88.29 | PASS | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Bottom slab Outer face: φMn ≥ Mu, minimum steel and crack control | 40.24 kN·m/m | ≥ 29.74 | PASS | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Bottom slab Inner face: φMn ≥ Mu, minimum steel and crack control | 73.96 kN·m/m | ≥ 61.75 | PASS | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Bottom slab: φVc ≥ Vu | 242.46 kN/m | ≥ 94.10 | PASS | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Side wall Outer face: φMn ≥ Mu, minimum steel and crack control | 55.90 kN·m/m | ≥ 38.96 | PASS | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Side wall Inner face: φMn ≥ Mu, minimum steel and crack control | 37.56 kN·m/m | ≥ 0.90 | PASS | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Side wall: φVc ≥ Vu | 180.12 kN/m | ≥ 39.68 | PASS | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
3. Calculation Steps (calculation core output, SI units)
[HyGeoWorks online preview - not for PE sealing or submittal] Outer width 3.60 m, outer height 3.10 m; concrete 3.660 m³/m; self-weight 86.14 kN/m Vertical earth pressure EV = 22.59 kPa; lateral earth pressure EH1 = 5.65-20.24 kPa, EH2 = 11.30-40.48 kPa (top of top slab to underside of bottom slab) Live load: HS20-44 single axle spread through fill of 1.20 m (Art. 4.4): along traffic 2.10 m × transverse 3.90 m, pressure 17.48 kPa, impact 0% (load positions: 1) Load combinations: 16 (Table 3.3 Group VIII: U = 1.3[D + 1.67(L + I) + E])
Reinforcement (per metre of barrel) (6 rows)
| Member | Tension face | Mu (kN·m) | Required As (cm²) | Bars @ spacing (cm) | φMn (kN·m) | fs / limit (kgf/cm²) | Verdict |
|---|---|---|---|---|---|---|---|
| Top slab | Outer face | 28.61 | 4.27 | D13@27.5 | 40.92 | 1803/2516 | PASS |
| Top slab | Inner face | 64.44 | 7.33 | D13@15.0 | 73.96 | 2174/2520 | PASS |
| Bottom slab | Outer face | 29.74 | 4.97 | D13@25.0 | 40.24 | 2094/2520 | PASS |
| Bottom slab | Inner face | 61.75 | 7.01 | D13@15.0 | 73.96 | 2200/2520 | PASS |
| Side wall | Outer face | 38.96 | 5.84 | D13@20.0 | 55.90 | 1892/2520 | PASS |
| Side wall | Inner face | 0.90 | 2.70 | D13@30.0 | 37.56 | 73/2444 | PASS |
Shear and distribution steel (3 rows)
| Member | Vu (kN) | φVc (kN) | Vc basis | Longitudinal distribution steel (cm²/m) |
|---|---|---|---|---|
| Top slab | 88.29 | 270.18 | Art. 7.3.6(7) (box culvert slabs with fill of 0.6 m or more) | 2.70 |
| Bottom slab | 94.10 | 242.46 | Art. 7.3.6(7) (box culvert slabs with fill of 0.6 m or more) | 2.70 |
| Side wall | 39.68 | 180.12 | Art. 7.3.6(2) simplified 0.53√fc'·b·d | 2.70 |
Assumptions and Limits Stated by the Calculation Core
- Load combinations (Table 3.3 Group VIII, load factor design): U = 1.3[1D + 1.67(L + I) + 1E], total 16 combinations; both lateral earth pressure cases (Art. 3.3) are designed; internal water (each cell full or empty) and every live load position are combined and enveloped
- Positive moments in the top and bottom slabs are also checked with lateral earth pressure βE = 0.5 (vertical earth pressure βE = 1.0) and the governing case with βE = 1.0 is taken (Table 3.3 note and Art. 3.20: in rigid frames not more than half of the moment due to lateral earth pressure may be used); negative moments, side walls and shear use βE = 1.0
- Analysis model: prismatic plane frame on member centrelines; linear base reaction (rigid foundation); haunch stiffness neglected; axial force neglected in section design (compression is beneficial; conservative); internal water and groundwater pressures take the dead load factor (engineering assumption)
- Not covered: seismic, fatigue (Art. 7.3.9), construction stages, wingwalls and headwalls, multiple lanes and adjacent vehicles; reaction redistribution on an elastic foundation
- Live load follows the Taiwan MOTC Highway Bridge Design Code (load factor design, HS20-44 truck); AASHTO LRFD HL-93 is not implemented.
Frequently Asked Questions
Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.
Which design basis does this calculator apply?
MOTC (Taiwan) Highway Bridge Design Code, load factor design with HS20-44 (legacy LFD method; not AASHTO LRFD / HL-93). Loads, load factors and reinforcement follow the Taiwan code named in the basis line (load factor design, HS20-44). This is a Taiwan-code calculation offered for reference: bar sizes are D13–D32 and strengths are entered in kgf/cm².
What assumptions and limits does the calculation core state for this tool?
Load combinations (Table 3.3 Group VIII, load factor design): U = 1.3[1D + 1.67(L + I) + 1E], total 16 combinations; both lateral earth pressure cases (Art. 3.3) are designed; internal water (each cell full or empty) and every live load position are combined and enveloped. Positive moments in the top and bottom slabs are also checked with lateral earth pressure βE = 0.5 (vertical earth pressure βE = 1.0) and the governing case with βE = 1.0 is taken (Table 3.3 note and Art. 3.20: in rigid frames not more than half of the moment due to lateral earth pressure may be used); negative moments, side walls and shear use βE = 1.0. Analysis model: prismatic plane frame on member centrelines; linear base reaction (rigid foundation); haunch stiffness neglected; axial force neglected in section design (compression is beneficial; conservative); internal water and groundwater pressures take the dead load factor (engineering assumption). Not covered: seismic, fatigue (Art. 7.3.9), construction stages, wingwalls and headwalls, multiple lanes and adjacent vehicles; reaction redistribution on an elastic foundation. Live load follows the Taiwan MOTC Highway Bridge Design Code (load factor design, HS20-44 truck); AASHTO LRFD HL-93 is not implemented.
Where is the calculation performed, and can the result be sealed or submitted?
The calculation runs in your browser, in the same WebAssembly calculation core this page loads. The result is an online preview: its first line reads "[HyGeoWorks online preview - not for PE sealing or submittal]".
Can I recalculate without a network connection?
Yes. "Download the offline workbench" on this page saves one HTML file that contains the workbench and the same calculation core; opened from disk it recalculates without a network connection.
From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark
The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.
Compare all plans, including 90-day passes and perpetual licenses