US Customary & SI Civil Engineering Unit Converter (NIST SP 811)
Unit converter for seven quantities — pressure, force, line load, unit weight, bending moment, discharge and area — using the exact factors reported by the calculation core (1 ft = 0.3048 m, 1 lbf = 4.4482216 N, gn = 9.80665 m/s²). The conversion table lists every unit of the selected quantity to seven significant figures, including gravitational metric units (kgf, tf).
Standards and references (context for this calculation; the basis the calculator applies is the one stated below):
Design basis as reported by the calculation core: ISO 80000-4 / NIST SP 811 Exact Conversion Factors (gn = 9.80665 m/s², 1 ft = 0.3048 m, 1 lbf = 4.4482216 N)
Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List.
Check Summary Preview (Software Format; Auto-Populated)
| Check item | Trial value | Status |
|---|---|---|
| kPa (kN/m²) | 27579.03 | Calculated value |
| MPa (N/mm²) | 27.57903 | Calculated value |
| Pa | 27579029 | Calculated value |
| psi (lbf/in²) | 4000 | Calculated value |
Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.
Desktop edition: calculation reports and cross-module quantity reconciliation
1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).
Governing Equations (US Customary Notation) & Basis Reported by the Calculation Core
The equations and limits the calculation core applies are listed below for independent checking.
Worked Example: Converting a 4,000 psi Concrete Strength to SI and Gravitational Units
The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.
Convert f'c = 4,000 psi to the pressure units listed by the calculation core: kPa, MPa, Pa, psf, ksf, bar, tf/m², kgf/cm², kgf/m² and meters of water head.
Every number in this example was produced by the calculation core (WebAssembly) when this page was built. The calculation core works in SI units: the US customary inputs below are converted with exact NIST SP 811 factors before the calculation, and results are shown in US customary units with the core's SI value in parentheses. Check values, criteria and calculation steps are the core's own SI output. Basis reported by the core: ISO 80000-4 / NIST SP 811 Exact Conversion Factors (gn = 9.80665 m/s², 1 ft = 0.3048 m, 1 lbf = 4.4482216 N)
1. Input Parameters
| Design Parameter | US Customary Value | Unit |
|---|---|---|
| Physical Quantity | Stress / Bearing Pressure (psi, psf, ksf, kPa, MPa, bar, kgf/cm², tf/m², m of water) | — |
| Input Magnitude | 4000 | — |
| Input Unit | psi (lbf/in.²) | — |
2. Computed Results (calculation core output)
| Output | Result |
|---|---|
| kPa (kN/m²) | 27579.03 |
| MPa (N/mm²) | 27.57903 |
| Pa | 27579029 |
| psi (lbf/in²) | 4000 |
| psf (lbf/ft²) | 576000 |
| ksf (kip/ft²) | 576 |
| bar | 275.7903 |
| tf/m² | 2812.278 |
| kgf/cm² | 281.2278 |
| kgf/m² | 2812278 |
| mH2O (m water head at 4°C) | 2812.278 |
3. Calculation Steps (calculation core output, SI units)
[HyGeoWorks online preview - not for PE sealing or submittal] 4000 psi = 27579.03 kPa
Unit Conversion Table (11 rows)
| Unit | Converted Value | |
|---|---|---|
| kPa (kN/m²) | 27579.03 | |
| MPa (N/mm²) | 27.57903 | |
| Pa | 27579029 | |
| psi (lbf/in²) | 4000 | (Input) |
| psf (lbf/ft²) | 576000 | |
| ksf (kip/ft²) | 576 | |
| bar | 275.7903 | |
| tf/m² | 2812.278 | |
| kgf/cm² | 281.2278 | |
| kgf/m² | 2812278 | |
| mH2O (m water head at 4°C) | 2812.278 |
Common US Customary Values Converted by the Calculation Core (computed when this page was built)
Inputs and outputs are listed with their units; conversion to and from SI is done by the calculation core.
| US Customary Value (input) | Converted by the Calculation Core | Typical Use |
|---|---|---|
| 120 pcf | 18.8505 kN/m³ | Soil unit weight |
| 150 pcf | 23.56312 kN/m³ | Normal-weight reinforced concrete |
| 2 ksf (= 1 tsf) | 95.76052 kPa = 2000 psf | Bearing pressure |
| 1 cfs | 448.8312 US gpm = 28.31685 L/s | Discharge |
| 10 acre | 40468.56 m² = 4.046856 ha | Site or catchment area |
Frequently Asked Questions (Basis, Scope & Limits)
Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.
Why does the 2 ppm difference between the international foot and the US survey foot matter?
Over a 15-ft wall the difference is negligible, but State Plane coordinates often carry eastings above 2,000,000 ft, where 2 ppm is about 4 ft. Linework in international feet overlaid on survey-foot topography can therefore be offset by several feet. NIST and NOAA's National Geodetic Survey deprecated the US survey foot at the end of 2022, but it remains in older State Plane data. The calculation core converts with the international foot (0.3048 m) only.
Why does the converter also list tf/m², kgf/cm² and meters of water head?
The core's conversion table includes gravitational metric units (kgf, tf, with gn = 9.80665 m/s²) and water head, which appear in Taiwanese and Japanese codes and in older drawings. They help when checking references prepared in those units.
Does the converter round intermediate values?
The core converts through SI with the exact factors above and reports each converted value to seven significant figures in the conversion table.
Is tsf based on short tons (2,000 lbf) or metric tonnes?
In US geotechnical practice 1 tsf is one short ton per square foot: 2,000 psf = 2.0 ksf (95.76 kPa), close to atmospheric pressure (1 atm = 101.3 kPa ≈ 1.058 tsf). tsf is not in the core's unit list; enter twice the tsf value in ksf.
From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark
The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.
Compare all plans, including 90-day passes and perpetual licenses