HyGeoWorks
🔒 Previews run in your browser (WebAssembly) · Inputs are sent only when you formally export
Taiwan SWC Handbook (2017) §2.20 Drop Structures · Stilling Basin, Sills & Wingwalls

Rectangular Drop Structure & Stilling Basin Calculator (Taiwan SWC Handbook §2.20)

Designs straight vertical drop structures and their stilling basins with US customary inputs (cfs, ft). The calculation core applies the Taiwan Soil and Water Conservation Handbook (2017) §2.20 Drop Structures — critical depth, basin length, end and longitudinal sills, baffle sill position, wingwall widths and RC slab thickness — and checks the drop height against the handbook limit.

Standards and references (context for this calculation; the basis the calculator applies is the one stated below):

Design basis for this page ▾
Taiwan Soil and Water Conservation Handbook (2017) §2.20 Drop Structures (apron and stilling basin length, sills, wingwalls, RC thickness)

Design basis as reported by the calculation core: Taiwan Soil and Water Conservation Handbook (2017) §2.20 Drop Structures (apron and stilling basin length, sills, wingwalls, RC thickness)

Recalculates in your browser as you edit inputs; Free sample Word report and DXF for this calculator; With a license: formal Word and DXF export, plus online project reports from the Project List.

Interactive US Customary Engineering Workstation
US customary inputs, shown as US (SI) in the results
Free Samples and Pricing
A public sample produced by the production service from this page's standard example and sealed with a verification code: open it in Word or AutoCAD and check it on the Verify page. Not for PE sealing or submittal.
Single-export pass: US$19 for one calculator, 3 formal exports in total within 24 hours of the first; full credit toward an upgrade within 30 days, full refund before the first export
Single-export passes (one calculator, 3 exports within 24 hours), 30-day passes, annual plans and perpetual licenses; printable quotes for purchase orders.
Formal export and the Project List are on the workbench toolbar above:
Licensed users can formally export this calculator's Word report (with a verification code and server time witness) and AutoCAD DXF drawing, or add several calculators to the free Project List and export a multi-chapter project report online, with nothing to install on a Mac. Projects with DEM terrain or GIS files can run in the heavy cloud computation or in the HydroStudio desktop edition.
The summary lists the basis, key results and check verdicts; its first line marks it as an online preview, not for PE sealing or submittal.
Download the Offline Workbench (Single HTML File, 39 Tools)
No install and no email required. It contains the same calculation core as this site; results are also a preview, not for sealed submittals.

Check Summary Preview (Software Format; Auto-Populated)

Hydraulic Drop Structure & Stilling Basin Design Calculator (US Customary Inputs): check summary (software format)
Calculation basis: Taiwan Soil and Water Conservation Handbook (2017) §2.20 Drop Structures (apron and stilling basin length, sills, wingwalls, RC thickness)
Check item Trial value Status
Drop height1.83 m ≤ 3 m (higher drops require a project-specific design)OK

Summary of the online calculation (software format) for checking by the designer and an independent checker. Final submittals require review and seal by the licensed Professional Engineer in responsible charge.

Desktop edition: calculation reports and cross-module quantity reconciliation

1. Calculation reports: with a license, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Agency plan reviewers and university faculty can request a complimentary review or teaching license (link below).

Desktop pricing (Pro US$990/yr) Download the desktop trial Complimentary license for agency reviewers and faculty
Scope and responsibility: This page is a single-calculator trial run; cross-module quantity reconciliation is done in desktop project runs. Problems outside this calculator's scope (see the FAQ) need an appropriate analysis method. Final submittals require review and seal by a licensed Professional Engineer.

Governing Equations (US Customary Notation) & Basis Reported by the Calculation Core

The equations and limits the calculation core applies are listed below for independent checking.

Rectangular Notch Critical Depth
d_c = [ Q² / (b² · g) ]^(1/3) [ft]
Q = design discharge (cfs); b = drop notch width (ft); g = 32.174 ft/s².
Stilling Basin Length & Sill Proportions (Taiwan SWC Handbook §2.20)
L = √(H · d_c) · [ 2.5 + 1.1·(d_c / H) + 0.7·(d_c / H)³ ] [ft], H'_endsill = 0.50 · d_c, longitudinal sill = 0.75 · H'
Where terrain is constrained the basin may be shortened to 0.8·L; wingwall widths are computed and taken as at least 1 m (3.28 ft), as noted by the core.

Worked Example: 6.0-ft Vertical Concrete Drop Structure at Q = 50 cfs

The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it. Verification cases, tolerances and actual differences for the calculation core are listed on the Benchmarks page.

Determine the critical depth d_c, stilling basin length L, end sill height H', longitudinal sill height, baffle sill position, wingwall widths and minimum RC slab thickness for a 5.0-ft-wide rectangular drop with H = 6.0 ft, 2.0-ft approach and tailwater depths and 6.0-ft channel top widths.

Every number in this example was produced by the calculation core (WebAssembly) when this page was built. The calculation core works in SI units: the US customary inputs below are converted with exact NIST SP 811 factors before the calculation, and results are shown in US customary units with the core's SI value in parentheses. Check values, criteria and calculation steps are the core's own SI output. Basis reported by the core: Taiwan Soil and Water Conservation Handbook (2017) §2.20 Drop Structures (apron and stilling basin length, sills, wingwalls, RC thickness)

1. Input Parameters

Design ParameterUS Customary ValueUnit
Drop Structure TypeStilling Basin Drop (with End & Longitudinal Sills)—
Design Discharge Q50cfs
Drop Notch Width b5ft
Vertical Drop Height H6ft
Upstream Approach Depth h_12ft
Downstream Tailwater Depth h_22ft
Upstream Channel Top Width W_u6ft
Downstream Channel Top Width W_d6ft
Brick MasonryNo—
Apron / Stilling Basin Length Provided(blank)ft

2. Computed Results (calculation core output)

OutputResult
Critical Depth dc1.46 ft (0.4449 m)
Stilling Basin Length L8.22 ft (2.506 m)
Minimum Terrain-Constrained Length 0.8L6.576 ft (2.004 m)
End Sill Height H'0.7298 ft (0.222 m)
Longitudinal Sill Height0.5474 ft (0.167 m)
Baffle Sill Distance X2.326 ft (0.709 m)
Upstream Wingwall Width B3.281 ft (1.000 m)
Downstream Wingwall Width A3.281 ft (1.000 m)
Min. RC Slab Thickness5.906 in (15 cm)
Max. Rebar Spacing9.843 in (25 cm)

Verification Checks (calculation core output)

Verification ItemComputed ResultGoverning Limit / CriterionStatusBasis
Drop height1.83 m≤ 3 m (higher drops require a project-specific design)PASSTaiwan Soil and Water Conservation Handbook (2017) §2.20 Drop Structures

3. Calculation Steps (calculation core output, SI units)

[HyGeoWorks online preview - not for PE sealing or submittal]
dc = (Q²/(b²·g))^(1/3) = (1.41584²/(1.524²×9.8))^(1/3) = 0.4449 m
Stilling basin length L = √(H·dc)·(2.5 + 1.1·dc/H + 0.7·(dc/H)³) = √(1.8288×0.4449)×(2.5 + 1.1×0.2433 + 0.7×0.2433³) = 2.506 m
End sill height H' = dc/2 = 0.222 m; longitudinal sill height = ¾H' = 0.167 m
Cx (Wd/b = 1.200 interpolated) = 0.1700; baffle sill position X = Cx·b + 0.45 = 0.709 m
Min. length 0.8L = 2.004 m (where terrain-constrained)
Upstream wingwall B = (Wu − b)/2 + h1 + 0.2 = 0.962 m; Downstream wingwall A = (Wd − b − 0.4)/2 + h + 0.2 = 0.762 m (each >= 1 m)
RC slab: thickness >= 15 cm, D13@25 cm (H ≤ 2 m)
US customary equivalents (NIST SP 811 conversion of the SI values reported by the core above; the core summary itself is unchanged)
  Critical Depth dc = 1.46 ft
  Stilling Basin Length L = 8.22 ft
  Minimum Terrain-Constrained Length 0.8L = 6.576 ft
  End Sill Height H' = 0.7298 ft
  Longitudinal Sill Height = 0.5474 ft
  Baffle Sill Distance X = 2.326 ft
  Upstream Wingwall Width B = 3.281 ft
  Downstream Wingwall Width A = 3.281 ft
  Min. RC Slab Thickness = 5.906 in
  Max. Rebar Spacing = 9.843 in

Assumptions and Limits Stated by the Calculation Core

Frequently Asked Questions (Basis, Scope & Limits)

Common questions about this calculator and its basis are answered below. Final submittals require review and seal by a licensed Professional Engineer.

Why is ventilation beneath the nappe of a vertical free-overfall drop important?

If the air pocket beneath the falling jet is sealed by the sidewalls, sub-atmospheric pressure draws the jet toward the drop wall, which can cause nappe oscillation and vibration and change the jet impact point assumed in the basin layout. Provide ventilation where the sidewalls enclose the nappe.

What is the maximum drop height covered by this calculator?

The calculation core checks the drop height against 3 m (9.84 ft) per the Taiwan Soil and Water Conservation Handbook (2017) §2.20; higher drops require a project-specific design (for example a series of lower drops or a chute with a stilling basin).

Should weep holes or underdrains be provided beneath the stilling basin slab?

Uplift beneath the slab is commonly relieved with weep holes or underdrains protected by graded filter material or geotextile so that foundation fines are not washed out. The calculator gives the minimum slab thickness and bar spacing of the handbook only; drainage and uplift checks are separate.

Does the HydroStudio desktop edition also design chutes and USBR stilling basins?

Yes. The HydroStudio desktop edition includes a chute and stilling basin module that sizes USBR Type II, Type III, Type IV and SAF basins following USBR Engineering Monograph No. 25 and FHWA HEC-14, alongside the Taiwan Soil and Water Conservation Handbook chute provisions.

USD Pricing · Checkout by Stripe · Printable USD Quotation

From the Online Preview to the HydroStudio Desktop Edition: Reports Without the Trial Watermark

The free online preview is not for PE sealing or submittal and has no Word report, DXF drawing or verification code. Licensed users can sign in on the calculator and formally export a single-tool Word report (with a verification code) and DXF drawing. Several calculators can be combined in the Project List and exported online as a multi-chapter project report, and projects with terrain or GIS files can run in the heavy cloud computation. For interactive 2D models and large simulations, the HydroStudio desktop edition (Windows 10/11, 64-bit) opens the exported .toml project and, with a license, writes report.docx, a report.xlsx with live formulas and DXF drawings without the trial watermark. Sealing and submittal remain the responsibility of the licensed engineer.

Monthly
Pro monthly
$119 / month
One discipline: $69 / month. Renews monthly until canceled; cancel any time before the next renewal and keep using it to the end of the paid month.
Buy monthly ($119/mo)
30 days
30-day pass
$79 / 30 days, one discipline
All modules: $135. One payment; it does not renew. The pass fee can be credited once toward an annual or perpetual license of the same discipline or a higher plan bought within 30 days after the pass ends, with the same email and in the same currency.
Buy a 30-day pass (from $79)
Quotation
Printable USD quotation
For any plan, including Firm (from 3 seats) and Enterprise (from 10 seats), which are sold only to businesses and other organizations, not to individual buyers: print the quotation or save it as a PDF for your purchasing process.
Request a printable USD quotation

Compare all plans, including 90-day passes and perpetual licenses

Checkout is processed by Stripe; a tax ID can be entered at checkout, and for one-time payments Stripe issues an invoice showing the buyer's name and tax ID. Procurement follows your organization's own rules.

Explore All 31 Tools (20 US Customary + 11 Reference: Basis Stated on Each Page)

Need to edit terrain, 2D flood models and design alternatives interactively on your computer, or see 3D views drawn from your project data? Use the HydroStudio desktop edition:
Download the Desktop Trial
No credit card or phone number is needed to download. Without a license it runs as a trial: local calculation and 3D viewing work, exported reports and drawings carry a trial watermark (not for submittal), and some built-in data libraries are limited. Plans and prices are on the Pricing page.