ACI 318-19 and FHWA Reference Notes and Calculation Scope Guides
Reference notes on the ACI 318-19 one-way shear size effect factor and FHWA HEC-22 drainage provisions, plus a plain account of which calculations this platform covers and which it leaves out.
US Code Reference Notes: ACI 318-19 One-Way Shear Size Effect Factor and FHWA HEC-22 (4th Edition, 2024) Provisions
These notes list code expressions, the figures the platform's code library returns for them, and their sources. The coefficients are as implemented in the platform's calculation library; confirm them against the current edition of ACI 318 before use.
Calculation Approaches in US Practice: General-Purpose Finite-Element Programs, Office Spreadsheets and This Platform
This guide outlines the usual role of three kinds of calculation aids and sets out where this platform stops. We did not run or test any other company's program for it, so it draws no speed, accuracy or quality conclusion about any product. For the platform itself, evidence of correctness is the set of benchmark cases summarized on the benchmarks page.
Sources and disclaimer: figures on these charts are drawn from the platform's code-constants library, from steel producers' published section data, or from the U.S. Government publications named beside each entry (FHWA, USDA, OSHA, FEMA, EPA and GSA). Naming a publication does not imply endorsement by any agency. Consensus standards (ACI, ASTM, AASHTO, AISC) are identified by designation only and none of their text is reproduced. The charts are a design aid rather than an official document, so confirm each figure against the current source. Engineering submittals remain the responsibility of the licensed professional engineer who seals them.