Check Summary Preview (Software Format; Auto-Populated)
| Check item | Trial value | Status |
|---|---|---|
| kPa (kN/m²) | 30000 | Calculated value |
| MPa (N/mm²) | 30 | Calculated value |
| Pa | 30000000 | Calculated value |
| psi (lbf/in²) | 4351.132 | Calculated value |
Summary of the online calculation (software format) for checking by the designer and an independent checker. Final sign-off remains the responsibility of the chartered or registered engineer.
Desktop edition: calculation reports and cross-module quantity reconciliation
1. Calculation reports: with a licence, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Independent checking engineers, authority reviewers and academics can request a complimentary review or teaching licence (link below).
1. Governing Equations & SI Nomenclature
The equations the calculation core applies are summarised below for independent checking.
The equations below summarise the method that the calculation core applies on this page. The design basis it reports is: ISO 80000-4 / NIST SP 811 Exact Conversion Factors (gn = 9.80665 m/s², 1 ft = 0.3048 m, 1 lbf = 4.4482216 N). The worked example further down lists the core's own calculation steps for the standard example.
2. Worked Standard Example (Computed by the Calculation Core)
The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it.
Design Scenario — Converting a Concrete Strength of 30 MPa: Convert 30 MPa (30 N/mm²) into kPa, bar, kgf/cm², tf/m², metres of water and psi.
The inputs below were passed to the calculation core (WebAssembly) when this page was built; every step, result and check shown here is the core's own output. Basis reported by the core: ISO 80000-4 / NIST SP 811 Exact Conversion Factors (gn = 9.80665 m/s², 1 ft = 0.3048 m, 1 lbf = 4.4482216 N)
Inputs Passed to the Calculation Core
| Parameter | Value | Unit |
|---|---|---|
| Physical Quantity | Stress / Pressure | — |
| Input Value | 30 | — |
| Source Unit | MPa (N/mm²) | — |
Calculation Steps (calculation core output)
[HyGeoWorks online preview - not for PE sealing or submittal]
- 30 MPa = 30000 kPa
Computed Results (calculation core output)
| Output Parameter | Calculated Value | SI Unit |
|---|---|---|
| kPa (kN/m²) | 30000 | — |
| MPa (N/mm²) | 30 | — |
| Pa | 30000000 | — |
| psi (lbf/in²) | 4351.132 | — |
| psf (lbf/ft²) | 626563 | — |
| ksf (kip/ft²) | 626.563 | — |
| bar | 300 | — |
| tf/m² | 3059.149 | — |
| kgf/cm² | 305.9149 | — |
| kgf/m² | 3059149 | — |
| mH2O (m water head at 4°C) | 3059.149 | — |
Unit Conversion Table (11 rows)
| Unit | Converted Value | |
|---|---|---|
| kPa (kN/m²) | 30000 | |
| MPa (N/mm²) | 30 | (Input) |
| Pa | 30000000 | |
| psi (lbf/in²) | 4351.132 | |
| psf (lbf/ft²) | 626563 | |
| ksf (kip/ft²) | 626.563 | |
| bar | 300 | |
| tf/m² | 3059.149 | |
| kgf/cm² | 305.9149 | |
| kgf/m² | 3059149 | |
| mH2O (m water head at 4°C) | 3059.149 |
3. Regional Design Options in This Edition: UK, EU, Singapore, Malaysia, Hong Kong & Australia
Symbols and units are SI unless stated otherwise.
- This calculator: the design basis is the one reported by the calculation core: ISO 80000-4 / NIST SP 811 Exact Conversion Factors (gn = 9.80665 m/s², 1 ft = 0.3048 m, 1 lbf = 4.4482216 N). The options listed below belong to the calculators named in each item.
- United Kingdom, Ireland & European Union: The retaining wall and slope stability calculators default to EN 1997-1:2004 Design Approach 1 (Combination 1 & Combination 2); the UK National Annex and 2nd-Gen EN 1997-1:2024 / EN 1997-3:2025 (MFA, and RFA for retaining walls) are selectable there, as are DA2 for retaining walls and DA3 for slopes. The retaining wall calculator lets γG, γQ and γφ' be overridden for a National Annex and designs metric H-bars (H10–H32) when concrete and steel strengths are entered.
- Singapore & Malaysia: The retaining wall calculator offers SS EN 1997-1:2010 with the Singapore National Annex, and the detention calculator offers a DID Malaysia MSMA 2nd Edition (2012) Equation 2.2 IDF rainfall mode besides directly entered design intensities.
- Hong Kong SAR: HyGeoWorks does not claim Hong Kong Buildings Department pre-accepted program status; the retaining wall calculator's HK GEO Geoguide 1 option shows the calculation core's steps and checks so that the result can be checked independently. With that option the calculation core applies the Geoguide 1 Table 6 and Table 7 partial factors at ULS and the §9.2.4 middle-third eccentricity check at SLS.
- Australia & New Zealand: No ARR 2019 IFD data is built in; design rainfall intensities for any AEP can be entered directly in the detention calculator. The HydroStudio desktop edition supports GDA2020 / MGA2020 zones 46–59 as well as WGS 84 / UTM zones.
4. Frequently Asked Questions
Common questions about this calculator are answered below. Final sign-off remains the responsibility of the chartered or registered engineer.
Are MPa and N/mm² identical?
Yes. 1 MPa = 10⁶ N / (10³ mm)² = 1 N/mm² exactly, so a concrete strength of 30 MPa is the same as 30 N/mm².
Why do older reports use kgf/cm² or tf/m²?
Before SI was adopted, many laboratories and design offices recorded pressures in kgf/cm² (1 kgf/cm² = 98.0665 kPa) and unit weights in tf/m³ (1 tf/m³ = 9.80665 kN/m³). Converting with 9.80665 rather than 10 avoids a systematic error of about 2%.
How do L/s, m³/s, m³/h and cfs relate?
1 m³/s = 1,000 L/s = 3,600 m³/h = 86,400 m³/day ≈ 35.3147 cfs, the last from 1 ft = 0.3048 m exactly.
How should moments per metre run be read?
A moment per metre of wall has units of (kN·m)/m. Algebraically this reduces to kN, but engineers keep kN·m/m to distinguish a moment per metre strip from a force per metre (kN/m).
5. Explore All 30 Calculators (SI Edition; Design Basis Stated on Each Page)
Each calculator below states its own design basis on its page; several apply Taiwan regulations and say so.