Check Summary Preview (Software Format; Auto-Populated)
| Check item | Trial value | Status |
|---|---|---|
| Top slab Outer face: φMn ≥ Mu, minimum steel and crack control | 40.92 kN·m/m ≥ 28.61 | OK |
| Top slab Inner face: φMn ≥ Mu, minimum steel and crack control | 73.96 kN·m/m ≥ 64.44 | OK |
| Top slab: φVc ≥ Vu | 270.18 kN/m ≥ 88.29 | OK |
| Bottom slab Outer face: φMn ≥ Mu, minimum steel and crack control | 40.24 kN·m/m ≥ 29.74 | OK |
| Bottom slab Inner face: φMn ≥ Mu, minimum steel and crack control | 73.96 kN·m/m ≥ 61.75 | OK |
| Bottom slab: φVc ≥ Vu | 242.46 kN/m ≥ 94.10 | OK |
Summary of the online calculation (software format) for checking by the designer and an independent checker. Final sign-off remains the responsibility of the chartered or registered engineer.
Desktop edition: calculation reports and cross-module quantity reconciliation
1. Calculation reports: with a licence, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Independent checking engineers, authority reviewers and academics can request a complimentary review or teaching licence (link below).
1. Worked Standard Example (Computed by the Calculation Core)
The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it.
Design Scenario — Standard example (calculation core defaults): The standard example uses the default inputs of the calculation core. Every number below was produced by the core when this page was built; nothing on this page is computed by hand.
The inputs below were passed to the calculation core (WebAssembly) when this page was built; every step, result and check shown here is the core's own output. Basis reported by the core: MOTC (Taiwan) Highway Bridge Design Code, load factor design with HS20-44; direct stiffness closed-frame analysis
Inputs Passed to the Calculation Core
| Parameter | Value | Unit |
|---|---|---|
| Number of Cells | Single cell | — |
| Clear Width per Cell | 3 | m |
| Clear Height | 2.5 | m |
| Top Slab Thickness | 0.3 | m |
| Bottom Slab Thickness | 0.3 | m |
| Side Wall Thickness | 0.3 | m |
| Fill Depth | 1.2 | m |
| Live Load | HS20-44 | — |
| Design Internal Water Depth | (blank) | m |
| External Groundwater Level | (blank) | m |
| Flotation Criterion | Designer-specified | — |
| Required Flotation Safety Factor | (blank) | — |
| Concrete Strength f'c | 280 | kgf/cm² |
| Rebar Yield Strength fy | 4200 | kgf/cm² |
| Exposure Condition | Moderate exposure (z ≤ 30,300 kgf/cm) | — |
| Bar Size | Selected by program | — |
| Culvert Length | (blank) | m |
Calculation Steps (calculation core output)
[HyGeoWorks online preview - not for PE sealing or submittal]
- Outer width 3.60 m, outer height 3.10 m; concrete 3.660 m³/m; self-weight 86.14 kN/m
- Vertical earth pressure EV = 22.59 kPa; lateral earth pressure EH1 = 5.65-20.24 kPa, EH2 = 11.30-40.48 kPa (top of top slab to underside of bottom slab)
- Live load: HS20-44 single axle spread through fill of 1.20 m (Art. 4.4): along traffic 2.10 m × transverse 3.90 m, pressure 17.48 kPa, impact 0% (load positions: 1)
- Load combinations: 16 (Table 3.3 Group VIII: U = 1.3[D + 1.67(L + I) + E])
Computed Results (calculation core output)
| Output Parameter | Calculated Value | SI Unit |
|---|---|---|
| Top slab midspan Mu (inner face tension) | 64.44 | kN·m/m |
| Side wall Mu (outer face tension) | 38.96 | kN·m/m |
| Rebar weight (estimate) | 167.0 | kg/m |
| Concrete | 3.660 | m³/m |
Verification Checks (calculation core output)
| Verification Check | Computed Value | Criterion | Verdict | Basis |
|---|---|---|---|---|
| Top slab Outer face: φMn ≥ Mu, minimum steel and crack control | 40.92 kN·m/m | ≥ 28.61 | OK | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Top slab Inner face: φMn ≥ Mu, minimum steel and crack control | 73.96 kN·m/m | ≥ 64.44 | OK | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Top slab: φVc ≥ Vu | 270.18 kN/m | ≥ 88.29 | OK | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Bottom slab Outer face: φMn ≥ Mu, minimum steel and crack control | 40.24 kN·m/m | ≥ 29.74 | OK | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Bottom slab Inner face: φMn ≥ Mu, minimum steel and crack control | 73.96 kN·m/m | ≥ 61.75 | OK | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Bottom slab: φVc ≥ Vu | 242.46 kN/m | ≥ 94.10 | OK | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Side wall Outer face: φMn ≥ Mu, minimum steel and crack control | 55.90 kN·m/m | ≥ 38.96 | OK | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Side wall Inner face: φMn ≥ Mu, minimum steel and crack control | 37.56 kN·m/m | ≥ 0.90 | OK | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
| Side wall: φVc ≥ Vu | 180.12 kN/m | ≥ 39.68 | OK | MOTC (Taiwan) Highway Bridge Design Code (2009 text) |
Reinforcement (per metre of barrel) (6 rows)
| Member | Tension face | Mu (kN·m) | Required As (cm²) | Bars @ spacing (cm) | φMn (kN·m) | fs / limit (kgf/cm²) | Verdict |
|---|---|---|---|---|---|---|---|
| Top slab | Outer face | 28.61 | 4.27 | D13@27.5 | 40.92 | 1803/2516 | PASS |
| Top slab | Inner face | 64.44 | 7.33 | D13@15.0 | 73.96 | 2174/2520 | PASS |
| Bottom slab | Outer face | 29.74 | 4.97 | D13@25.0 | 40.24 | 2094/2520 | PASS |
| Bottom slab | Inner face | 61.75 | 7.01 | D13@15.0 | 73.96 | 2200/2520 | PASS |
| Side wall | Outer face | 38.96 | 5.84 | D13@20.0 | 55.90 | 1892/2520 | PASS |
| Side wall | Inner face | 0.90 | 2.70 | D13@30.0 | 37.56 | 73/2444 | PASS |
Shear and distribution steel (3 rows)
| Member | Vu (kN) | φVc (kN) | Vc basis | Longitudinal distribution steel (cm²/m) |
|---|---|---|---|---|
| Top slab | 88.29 | 270.18 | Art. 7.3.6(7) (box culvert slabs with fill of 0.6 m or more) | 2.70 |
| Bottom slab | 94.10 | 242.46 | Art. 7.3.6(7) (box culvert slabs with fill of 0.6 m or more) | 2.70 |
| Side wall | 39.68 | 180.12 | Art. 7.3.6(2) simplified 0.53√fc'·b·d | 2.70 |
Assumptions and Limits Stated by the Calculation Core
- Load combinations (Table 3.3 Group VIII, load factor design): U = 1.3[1D + 1.67(L + I) + 1E], total 16 combinations; both lateral earth pressure cases (Art. 3.3) are designed; internal water (each cell full or empty) and every live load position are combined and enveloped
- Positive moments in the top and bottom slabs are also checked with lateral earth pressure βE = 0.5 (vertical earth pressure βE = 1.0) and the governing case with βE = 1.0 is taken (Table 3.3 note and Art. 3.20: in rigid frames not more than half of the moment due to lateral earth pressure may be used); negative moments, side walls and shear use βE = 1.0
- Analysis model: prismatic plane frame on member centrelines; linear base reaction (rigid foundation); haunch stiffness neglected; axial force neglected in section design (compression is beneficial; conservative); internal water and groundwater pressures take the dead load factor (engineering assumption)
- Not covered: seismic, fatigue (Art. 7.3.9), construction stages, wingwalls and headwalls, multiple lanes and adjacent vehicles; reaction redistribution on an elastic foundation
- Live load follows the Taiwan MOTC Highway Bridge Design Code (load factor design, HS20-44 truck); AASHTO LRFD HL-93 is not implemented.
2. Frequently Asked Questions
Common questions about this calculator are answered below. Final sign-off remains the responsibility of the chartered or registered engineer.
Which design basis does this calculator apply?
MOTC (Taiwan) Highway Bridge Design Code, load factor design with HS20-44; direct stiffness closed-frame analysis. Loads, load factors and reinforcement follow the Taiwan code named in the basis line (load factor design, HS20-44). This is a Taiwan-code calculation offered for reference: bar sizes are D13–D32 and strengths are entered in kgf/cm².
What assumptions and limits does the calculation core state for this tool?
Load combinations (Table 3.3 Group VIII, load factor design): U = 1.3[1D + 1.67(L + I) + 1E], total 16 combinations; both lateral earth pressure cases (Art. 3.3) are designed; internal water (each cell full or empty) and every live load position are combined and enveloped. Positive moments in the top and bottom slabs are also checked with lateral earth pressure βE = 0.5 (vertical earth pressure βE = 1.0) and the governing case with βE = 1.0 is taken (Table 3.3 note and Art. 3.20: in rigid frames not more than half of the moment due to lateral earth pressure may be used); negative moments, side walls and shear use βE = 1.0. Analysis model: prismatic plane frame on member centrelines; linear base reaction (rigid foundation); haunch stiffness neglected; axial force neglected in section design (compression is beneficial; conservative); internal water and groundwater pressures take the dead load factor (engineering assumption). Not covered: seismic, fatigue (Art. 7.3.9), construction stages, wingwalls and headwalls, multiple lanes and adjacent vehicles; reaction redistribution on an elastic foundation. Live load follows the Taiwan MOTC Highway Bridge Design Code (load factor design, HS20-44 truck); AASHTO LRFD HL-93 is not implemented.
Where is the calculation performed, and can the result be sealed or submitted?
The calculation runs in your browser, in the same WebAssembly calculation core this page loads. The result is an online preview: its first line reads "[HyGeoWorks online preview - not for PE sealing or submittal]".
Can I recalculate without a network connection?
Yes. "Download the offline workbench" on this page saves one HTML file that contains the workbench and the same calculation core; opened from disk it recalculates without a network connection.
3. Explore All 30 Calculators (SI Edition; Design Basis Stated on Each Page)
Each calculator below states its own design basis on its page; several apply Taiwan regulations and say so.