Eurocode Reference Notes and Calculation Scope Guides
Reference notes on the Eurocode 2 shear size factor and Eurocode 7 Design Approach 1 partial factors, plus a plain statement of what this platform does and does not calculate.
Eurocode Reference Notes: EC2 Shear Size Factor k, EC7 Design Approach 1 Partial Factors and Embedded Wall Overdig
These notes collect code expressions and factors together with their sources. The partial factors are the EN 1997-1:2004 Annex A recommended values held in the platform's code library; National Annexes may change them.
Calculation Methods and Scope: General Finite-Element Software, In-House Spreadsheets and This Platform
This page describes what three kinds of calculation tools are typically used for and states the scope of this platform. No other vendor's software was tested for this page, and it makes no performance or accuracy comparison with any product. The platform's own verification is the set of benchmark cases summarised on the benchmarks page.
Sources and disclaimer: values on these pages come from the platform's code-constants library, from producers' published section tables, or from the official publications named in each row. Rows that cite the UK Government GHG Conversion Factors contain public sector information licensed under the Open Government Licence v3.0. Standards (EN, BS) are cited by number only and their text is not reproduced. These pages are a design aid, not an official document; check the current source before use. Calculations must be checked and approved by a suitably qualified engineer.