Check Summary Preview (Software Format; Auto-Populated)
| Check item | Trial value | Status |
|---|---|---|
| Total Carbon Emissions | 608.52 tCO2e | Calculated value |
| Materials (A1-A3) | 590.86 tCO2e | Calculated value |
| Transport (A4) | 11.18 tCO2e | Calculated value |
| Site Construction (A5) | 6.48 tCO2e | Calculated value |
Summary of the online calculation (software format) for checking by the designer and an independent checker. Final sign-off remains the responsibility of the chartered or registered engineer.
Desktop edition: calculation reports and cross-module quantity reconciliation
1. Calculation reports: with a licence, the desktop edition writes Word (.docx) and Excel (.xlsx) calculation reports and DXF drawings without the trial watermark, listing the inputs, the equations used and the results; in trial mode the step-by-step detail is hidden. For this calculator alone, licensed users can also sign in on the calculator above and formally export a single-tool Word report (with a verification code) and DXF drawing. The Pro plan (all modules) is US$990 per year; see Pricing for monthly, perpetual and team plans.
2. Cross-module reconciliation: desktop project runs carry the design peak flow into downstream channel, culvert and bridge hydraulics; terrain cut/fill into the earthwork balance, cost and carbon tables; structural concrete, formwork and rebar take-off into the cost and carbon tables; slope and excavation safety-factor thresholds into construction monitoring trigger levels.
3. Independent checking engineers, authority reviewers and academics can request a complimentary review or teaching licence (link below).
1. Worked Standard Example (Computed by the Calculation Core)
The worked example below was computed by the calculation core when this page was built; entering the same inputs above reproduces it.
Design Scenario — Standard example (calculation core defaults): The standard example uses the default inputs of the calculation core. Every number below was produced by the core when this page was built; nothing on this page is computed by hand.
The inputs below were passed to the calculation core (WebAssembly) when this page was built; every step, result and check shown here is the core's own output. Basis reported by the core: PAS 2080:2023 & UK DESNZ Greenhouse Gas Reporting Conversion Factors 2026 (Open Government Licence v3.0)
Inputs Passed to the Calculation Core
| Parameter | Value | Unit |
|---|---|---|
| Concrete Strength | 280 kgf/cm² | — |
| Concrete Volume | 1000 | m³ |
| Rebar Quantity | 80 | t |
| Spoil Hauled Off Site | 5000 | m³ |
| Spoil Bulk Density | 1.8 | t/m³ |
| One-Way Haul Distance | 12 | km |
| Plant Diesel | 2000 | L |
| Site Electricity | 10000 | kWh |
| Low-Carbon Alternative | No comparison | — |
| Allocated Carbon Budget | (blank) | tCO2e |
| Specified Concrete Emission Factor | (blank) | kgCO2e/m³ |
Calculation Steps (calculation core output)
[HyGeoWorks online preview - not for PE sealing or submittal]
Computed Results (calculation core output)
| Output Parameter | Calculated Value | SI Unit |
|---|---|---|
| Total Carbon Emissions | 608.52 | tCO2e |
| Materials (A1-A3) | 590.86 | tCO2e |
| Transport (A4) | 11.18 | tCO2e |
| Site Construction (A5) | 6.48 | tCO2e |
Stage-by-Stage Carbon Breakdown (5 rows)
| Item | Quantity | Unit | Factor (kgCO2e/unit) | Emissions (tCO2e) | Source |
|---|---|---|---|---|---|
| Concrete | 1000.0 | m3 | 285.100 | 285.10 | UK DESNZ 2026, Construction / Concrete, primary material production (118.8 kgCO2e/t) x platform-assumed density 2.4 t/m3 = 285.1 kgCO2e/m3 (the per-m3 value is not an official factor; OGL v3.0) |
| Reinforcing Steel | 80.0 | t | 3821.949 | 305.76 | UK DESNZ 2026, Construction / Metals, primary material production (3821.94858 kgCO2e/t; generic metals factor, not rebar-specific; where a product EPD is available, use its value for the rebar line instead; OGL v3.0) |
| Earthwork Haulage | 108000.0 | t-km | 0.1036 | 11.18 | UK DESNZ 2026, HGV (non-refrigerated, all diesel), Average non-refrigerated HGVs, Average laden (0.10356 kgCO2e/t-km; OGL v3.0) |
| Non-Road Diesel | 2000.0 | L | 2.584 | 5.17 | UK DESNZ 2026, Diesel (average biofuel blend), direct combustion (2.58354 kgCO2e/L; WTT 0.61 kgCO2e/L not included; OGL v3.0) |
| Site Electricity | 10000.0 | kWh | 0.131 | 1.31 | UK DESNZ 2026, UK electricity generated (0.131 kgCO2e/kWh; T&D 0.013 optional; OGL v3.0) |
Assumptions and Limits Stated by the Calculation Core
- Contains public sector information licensed under the Open Government Licence v3.0 (UK DESNZ Greenhouse Gas Reporting Conversion Factors 2026; no commercial or restricted databases are redistributed).
2. Frequently Asked Questions
Common questions about this calculator are answered below. Final sign-off remains the responsibility of the chartered or registered engineer.
Which design basis does this calculator apply?
PAS 2080:2023 & UK DESNZ Greenhouse Gas Reporting Conversion Factors 2026 (Open Government Licence v3.0). Only the materials, transport and construction stages are calculated; this is a screening estimate, not a whole-life assessment. Emission factors and their source are the public datasets named in the basis line, which differ by market edition; in the US edition the GSA IRA concrete and steel GWP limits are checked only when a product EPD value is entered. The input list keeps the Taiwan concrete strength classes (140–280 kgf/cm²) and the SD280 rebar label; check that the factors suit your materials.
What assumptions and limits does the calculation core state for this tool?
Contains public sector information licensed under the Open Government Licence v3.0 (UK DESNZ Greenhouse Gas Reporting Conversion Factors 2026; no commercial or restricted databases are redistributed).
Where is the calculation performed, and can the result be sealed or submitted?
The calculation runs in your browser, in the same WebAssembly calculation core this page loads. The result is an online preview: its first line reads "[HyGeoWorks online preview - not for PE sealing or submittal]".
Can I recalculate without a network connection?
Yes. "Download the offline workbench" on this page saves one HTML file that contains the workbench and the same calculation core; opened from disk it recalculates without a network connection.
3. Explore All 30 Calculators (SI Edition; Design Basis Stated on Each Page)
Each calculator below states its own design basis on its page; several apply Taiwan regulations and say so.