SI Reference Tables: Reinforcement, Steel Sections, Drainage Rules and UK Carbon Factors
SI lookup tables: BS 4449 H10-H40 bar areas, UKC/UKB and sheet pile section properties, England's SuDS discharge limits with Environment Agency rainfall allowance rules, and UK Government GHG conversion factors.
Metric Ribbed Reinforcement Table (H10 to H40, B500B): Bar Area, Mass per Metre and Area per Metre Width
Nominal diameters, bar areas and masses are the values held in the platform's code-constants library for BS 4449:2005+A3:2016 Grade B500B bars (fyk = 500 MPa), the same constants used by the online tools. Area per metre width is the bar area divided by the bar spacing, rounded to the nearest mm²/m.
Selected UKC and UKB Section Properties (Blue Book) and Steel Sheet Pile Properties per Metre of Wall
Properties of four universal column and beam sections as printed in the Steel for Life / SCI Blue Book (Eurocode 3 with the UK National Annex, BS EN 10365:2017), and of two ArcelorMittal sheet pile sections per metre of wall from the producer's published tables. These sections are not in the platform's code library: the linked temporary works calculator uses CNS 1490 H-shapes and Taiwan specifications.
Drainage Reference Notes for England: National SuDS Standards Discharge Limits and Environment Agency Peak Rainfall Allowances
This page quotes two official sources for surface water drainage design in England: Defra's National standards for sustainable drainage systems (first published 19 June 2025) and the Environment Agency guidance on climate change allowances for flood risk assessments (last updated 27 May 2022). The platform's code library holds no Manning roughness table for UK practice, so none is given here; roughness is a user input in the online tools.
Selected UK Government GHG Conversion Factors (DESNZ) Used by the Carbon Calculator
The factors below are held in the platform's code library and agree with the UK Government GHG Conversion Factors for Company Reporting, 2026 edition (first published 11 June 2026). Contains public sector information licensed under the Open Government Licence v3.0. Library entries for diesel combustion, HGV freight and primary metals do not match the 2026 edition and are not listed.
Sources and disclaimer: values on these pages come from the platform's code-constants library, from producers' published section tables, or from the official publications named in each row. Rows that cite the UK Government GHG Conversion Factors contain public sector information licensed under the Open Government Licence v3.0. Standards (EN, BS) are cited by number only and their text is not reproduced. These pages are a design aid, not an official document; check the current source before use. Calculations must be checked and approved by a suitably qualified engineer.