HyGeoWorks

Calculation Methods and Scope: General Finite-Element Software, In-House Spreadsheets and This Platform

This page describes what three kinds of calculation tools are typically used for and states the scope of this platform. No other vendor's software was tested for this page, and it makes no performance or accuracy comparison with any product. The platform's own verification is the set of benchmark cases summarised on the benchmarks page.

Summary table

→ Go to downloads (desktop installer and the offline workbench files)

ItemGeneral finite-element softwareIn-house spreadsheetsThis platform
Typical useNumerical analysis of stress, deformation and seepage in a continuum (capabilities vary by product)Formula calculations written by a firm for its own casesCode-based checks in hydrology, hydraulics, geotechnics and structures, with a calculation report
How the basis is shownAs documented in each product's manuals and outputAs set up by the authorTool pages and reports state the code, clause and expression used
VerificationThe vendor's published verification documentsBy the userBenchmark cases run with the command hydro verify-benchmarks and summarised on the benchmarks page
OutputDepends on the productSpreadsheet filesThe desktop software writes report.docx, report.xlsx with formulas, DXF drawings and a single-file offline 3D view (scene3d.html); licensed users can also formally export a single-tool Word report and DXF drawing from the online tool pages
Outside the scopeDepends on the productDepends on the authorThree-dimensional nonlinear dynamic analysis, effective-stress liquefaction analysis and similar continuum numerical analysis

Notes and Conditions of Use

  • Free results from the online tools are previews, not signed calculations, and have no Word report, DXF drawing or verification code. Formal reports carry an Ed25519 verification code: licensed users can formally export a single-tool report online, or combine several tools in the Project List and export a multi-chapter project report online; projects with terrain or GIS files can run in the heavy cloud computation or the desktop software.
  • In this market the box culvert, liquid-retaining structure, pile cap, counterfort wall, diaphragm wall, sewer profile, road alignment and temporary works calculators are reference calculations to Taiwan codes (the pavement tool follows the AASHTO 1993 guide); each tool page states its basis.

Frequently Asked Questions

Is this page a tested comparison with other software?

No. No other vendor's software was tested, and the page only describes typical uses and this platform's scope. Choose tools from each vendor's own documentation and the needs of the project.

How can a checker verify a report produced by the desktop software?

Reports from the licensed desktop software, and single-tool reports formally exported online by licensed users, carry an Ed25519 digital signature code that can be checked on this site's Report verification page. The check runs in the browser and needs no sign-in.