HyGeoWorks

検証事例:計算コアの 69 件の照合結果

計算コアを、文献の例題、他ソフトウェアの検証例、解析解、EPA SWMM 5.2.4 と照合しています。69 件すべてが許容差内です。手引書の誤植や既知の限界も隠さず掲載しています。事例ごとの参照値と出典、計算値、許容差と根拠の一覧は、現在は繁体字中国語のページで公開しています。hydro verify-benchmarks を実行すると、お手元の PC で同じ照合を再現できます。

69 / 69

件が許容差内

文献の例題 51・他ソフトウェア 9・解析解 7・独自実装の算例 2

0.02%

EPA SWMM 5.2.4 との流出ピークの最大差(自由水面の管路網)

Nash-Sutcliffe 係数 0.9997 以上。調整池の水位追跡は +0.37%。HEC-22 集水ます 142 ケース(縦断勾配 128、サグ 14)の最大相対差 0.019%

0.005

Slide2 との安全率の許容差

アンカー、マイクロパイル、補強土(ネイリング)、5 層補強材

4.9 × 10−16

オンライン版とデスクトップ版の計算コアの最大相対差

2026-11-13 に 376 ケース・101,613 個の値を比較

照合の方法

許容差の根拠を明記

各事例に許容差の根拠を記載します。出典の最終桁の半単位(0.01 まで記載なら ±0.005)、図表の読み取り精度(FHWA HDS-5 のノモグラフ ±10%、IOGP GIGS ±0.03 m など)、Slide2 との照合では安全率の差 0.005 です。

誤植は並べて表示

手引書の誤植や途中値の丸め(11 件)は、出典の値と補正後の目標値を並べて表示します。差を隠すために参照値を書き換えることはしません。

再現可能

入力値はすべてソースコードに固定し、外部ファイル・通信・乱数・スレッドの実行順に依存しません。何度実行しても同じ報告(benchmarks.md、.xlsx、.json)になります。

EPA SWMM との相互照合

流出抑制と調整池のモジュールは標準の EPA SWMM モデルも出力するため、同じケースを SWMM で計算して比較できます。

事例の分類

  • 水文
  • カルバート
  • 水理(減勢工、土石流)
  • 調整池・雨水貯留
  • 斜面安定
  • 擁壁・補強土壁・ふとんかご
  • 砂防堰堤
  • 支持力
  • 2次元氾濫
  • 座標変換
  • プロジェクト処理(内蔵プロジェクトファイルを通しで計算)
  • 液状化と杭(独自実装の算例。文献の例題ではありません)

事例の種類:文献の例題と表の値・他ソフトウェアの検証例・解析解・独自実装の算例(文献ではない)

事例ごとの参照値・計算値・許容差の表(現在は繁体字中国語)

hydro verify-benchmarks --include-slow

全 69 件の英語版データ(参照値と出典、許容差、計算値、判定)を GitHub でオープンデータ(CC BY 4.0)として公開しています: github.com/hygeoworks/hydrostudio-benchmarks

事例一覧

詳細ページと同じ分類で、全事例と外部プログラムとの比較を一覧にしています。事例名は GitHub の公開データと同じ英語表記です。各事例の参照値・計算値・許容差は、各行のリンク先(繁体字中国語のページ)と GitHub の公開データにあります。

水文・SWMM

事例照査内容(英語)詳細
X-01Drainage network, dynamic wave: S1 free-surface flow, S2 pressurized flow, S3 backwater from a fixed outfall stage, S4 looped network, S5 tabular storage unit + orifice + weir, S6 pump station, S7 control rules + outlet structures, S8 Type 3 pump + rule-based start/stop; 16 sets in total比較対象:EPA SWMM 5.2.4 (swmm-toolkit, DYNWAVE, SLOT, 1 s time step)FULL: S1 peak flow difference ≤ 0.02%, manhole depth difference ≤ 0.04%, NSE ≥ 0.9997; S3 ≤ 0.13%, ≤ 0.21%; S4 ≤ 2.25%, ≤ 2.06%; S2 flow difference ≤ 2.9%, manhole depth higher in this program by 5.3%/9.3% (SWMM includes the Sjoberg slot area in the flow area; this program does not). PARTIAL/NONE: flow ≤ 5.0%, depth ≤ 6.4%. S5 ≤ 0.03% (NSE 1.0000); S6 flow ≤ 2.06%, depth ≤ 0.50%, pump starts 1 = 1; S7 flow ≤ 4.47%, depth ≤ 3.73%, gate openings 0.30–1.00 identical to SWMM; S8 flow ≤ 5.1%, pump starts 10 = 10; at the instant of pump start-up (< 1 minute) the surge depth at J2 is +40% (difference in slot storage)数値(繁体字)
X-02HEC-22 inlet interception: on grade, 8 types × 2 streets × 2 longitudinal slopes × 4 flows; in sag, 7 types × 2 streets比較対象:EPA SWMM 5.2.4 (STREET cross-section + INLETS)On grade, 128 sets: maximum relative difference 0.019%; in sag, 14 sets: 0.000%数値(繁体字)
X-03Detention pond level-pool routing (same inflow, same pond geometry and outlet works); pond defined by a depth–area table (200 → 4000 m²)比較対象:EPA SWMM 5.2.4 (swmm-toolkit, dynamic wave)Maximum depth +0.51%, peak outflow +0.37%; both .inp files run without errors, continuity error ≈ 0%. Pond defined by a depth–area table: maximum depth +0.25%, peak outflow −0.39%数値(繁体字)
X-04Multi-catchment topological routing (demonstration network with series and parallel connections + overflow paths)比較対象:EPA SWMM 5.2.4Maximum depths of the three ponds +0.00%, +0.02%, −0.01%; peak at the network outlet +0.08%; continuity error 0.000%数値(繁体字)
H-01Dimensionless rainfall intensity formula: P = 4000 mm, T = 50 yr, t = 5 min照査する量:Average rainfall intensity I(50, 5)数値(繁体字)
H-02Dimensionless rainfall intensity formula: P = 4000 mm, T = 50 yr, t = 20 min照査する量:Average rainfall intensity I(50, 20)数値(繁体字)
H-0350-year Horner coefficient expanded from the dimensionless rainfall intensity formula: P = 3000 mm照査する量:Horner coefficient a (I = a/(t + 55)^c)数値(繁体字)
H-04SCS triangular hydrograph base time: Tc = 5 min照査する量:Base time Tb = 2.67(√Tc + 0.6Tc) (1-hour lower limit not applied)数値(繁体字)
H-05SCS triangular hydrograph base time: Tc = 20 min照査する量:Base time Tb = 2.67(√Tc + 0.6Tc)数値(繁体字)
H-06TR-55 Example 3-1 sheet flow, segment AB照査する量:Travel time Tt (dense grass n 0.24, L 100 ft, P2 3.6 in, s 0.01)数値(繁体字)
H-07TR-55 Example 3-1 shallow concentrated flow, segment BC照査する量:Travel time Tt (unpaved, s 0.01, L 1400 ft)数値(繁体字)
H-08SCS Type II 24-hour rainfall distribution: maximum 1-hour rainfall ratio照査する量:Maximum 1 h cumulative rainfall ratio (built-in HDS-2 Table 6.5, 0.5 h interval)数値(繁体字)
H-09MSMA rainfall intensity equation: Ibu Pejabat JPS, 20-year ARI, 30 min照査する量:Average rainfall intensity i = λT^κ/(d + θ)^η数値(繁体字)
H-10Japanese Cleveland-type rainfall intensity equation: block 1 of the target rainfall table (10 min)照査する量:Intensity converted from the maximum 10-min rainfall increment (I = 5361.6/(t^0.831 + 25.995))数値(繁体字)
D-01Building-site water retention index worked example: new construction of ○○ Elementary School, green-space water retention照査する量:Green-space water retention volume Q1 (A1 = 2957.12 m², f = 10⁻⁵ m/s, t = 86,400 s)数値(繁体字)
D-02Building-site water retention index worked example: water retention of the original site照査する量:Original-site water retention volume Q0 (A0 = 7803.68 m²)数値(繁体字)
D-03Building-site water retention index worked example: water retention index照査する量:Water retention index λ = ΣQi/Q0 (the source judges 0.47 < λc 0.5, non-compliant)数値(繁体字)
D-04Detention pond defined by a depth–area table: frustum volume within an interval (area 100 → 400 m², depth 0 → 2 m), at depth 1 m照査する量:Storage volume V(1 m)数値(繁体字)

カルバート・減勢工・土石流

事例照査内容(英語)詳細
C-01HDS-5 Design Example 1.3: 54 in RCP, groove end with headwall, HY-8 polynomial inlet control照査する量:Inlet-control headwater HWi (Q 200 cfs, S 0.01)数値(繁体字)
C-02HDS-5 Design Example 1.4: 5 ft × 5 ft square-edge box culvert, HY-8 polynomial inlet control照査する量:Inlet-control headwater HWi (Q 300 cfs, S 0.02)数値(繁体字)
C-03HDS-5 Design Example 1.3: 54 in RCP, HDS-5 (A.3) submerged inlet control照査する量:Inlet-control headwater HWi数値(繁体字)
C-04HDS-5 Design Example 1.3: 54 in RCP outlet control (ke 0.2, n 0.012, L 200 ft)照査する量:Full-flow head loss H (HDS-5 Eq. 3.5)数値(繁体字)
C-05HDS-5 Design Example 1.3: 54 in RCP outlet velocity (inlet control)照査する量:Outlet velocity Vo (normal depth)数値(繁体字)
C-06HDS-5 Chart 1A = Highway Drainage Design Code (Taiwan) Appendix N.1: D 1050 mm circular pipe, scale 1照査する量:HW/D (Q 3.40 m³/s, S 0.02, HDS-5 (A.3))数値(繁体字)
C-07HDS-5 Chart 8A = Highway Drainage Design Code (Taiwan) Appendix N.2: 1500 × 600 mm box culvert, scale 1照査する量:HW/D (Q 2.12 m³/s, S 0.02, HDS-5 (A.3))数値(繁体字)
R-01USBR Type III stilling basin: basin length ratio (y1 0.322 m, Fr1 6.9, WB 3.0 m)照査する量:Basin length ratio L/y2数値(繁体字)
R-02SAF stilling basin: basin length (y1 0.348 m, Fr1 6.1, WB 3.0 m)照査する量:Basin length LB数値(繁体字)
R-03Debris-flow equilibrium concentration (Takahashi equation): θ 15°, φ 35°, γs 2.65照査する量:Equilibrium concentration Cd数値(繁体字)
R-04Debris-flow discharge: Cm 0.7, Qp 47 cms照査する量:Debris-flow peak discharge QD = Cm·Qp/(Cm − Cd)数値(繁体字)
R-05Debris-flow design example (original riverbed): So 0.268, φ 35°, γs 2.6, Cm 0.68, Qp 40 cms, B 25 m照査する量:Debris-flow peak discharge QD数値(繁体字)
P-01Project-file culvert ([[swc.culverts]]): the 5 ft × 5 ft square-edge box culvert of HDS-5 Design Example 1.4, entered in SI units照査する量:Inlet-control headwater HWi数値(繁体字)

二次元氾濫・座標変換

事例照査内容(英語)詳細
X-05GeoTIFF/Shapefile two-way read interoperability, latitude/longitude to TM2 conversion, resampling of latitude/longitude DEMs比較対象:GDAL 3.12 (rasterio, pyogrio), pyshp, PROJAll 42 items pass; latitude/longitude to TM2 differs from PROJ by 0.007 mm; latitude/longitude DEM resampling differs from GDAL bilinear by ≤ 3.5 mm数値(繁体字)
FL-01Ritter dry-bed dam break (h0 1 m, dam at x 200 m, 400 × 2 cells, Δx 1 m, t = 20 s, frictionless, second order)照査する量:Relative L1 error of the depth profile (against the analytical solution h = (2c₀ − ξ)²/(9g))数値(繁体字)
FL-02Inclined plane at equilibrium under steady rainfall (length 200 m, width 10 m, slope 0.01, n 0.03, 50 mm/hr), 2-hour simulation照査する量:Outflow at the downstream end (at equilibrium = rainfall rate × area)数値(繁体字)
FL-03Inclined plane at equilibrium under steady rainfall: depth at x = 102.5 m照査する量:Equilibrium depth (kinematic wave solution h = (i·x·n/√S)^0.6)数値(繁体字)
G-01Transverse Mercator projection, EPSG worked example: OSGB 1936 / British National Grid, 50°30′N, 0°30′E照査する量:Easting E数値(繁体字)
G-02Transverse Mercator projection, GIGS test 5101 part 1 (WGS 84, origin 49°N 2°W): 3°E, 80°N照査する量:Northing N数値(繁体字)

斜面安定

事例照査内容(英語)詳細
S-01ACADS verification example 1(a): homogeneous 2:1 slope (height 10 m, c′ 3 kPa, φ′ 19.6°, γ 20 kN/m³), simplified Bishop method, grid search照査する量:Factor of safety FS of the critical circle数値(繁体字)
S-02Planar wedge (slope height 8 m, slip plane 30°, c 5 kPa, φ 30°, γ 20), Spencer method照査する量:Factor of safety FS数値(繁体字)
S-03Duncan & Wright Figure 6.34 = Slide2 #85: φ = 0, single horizontal support 9,000 lb/ft (passive), fixed circle P照査する量:Factor of safety FS (simplified Bishop method)数値(繁体字)
S-04Duncan & Wright Figure 6.34 = Slide2 #85: φ = 0, single horizontal support 9,000 lb/ft (active), fixed circle P照査する量:Factor of safety FS (simplified Bishop method)数値(繁体字)
S-05Yamagami, Jiang & Ueno (2000) = Slide2 #54: without piles, fixed circle照査する量:Factor of safety FS (simplified Bishop method)数値(繁体字)
S-06Yamagami, Jiang & Ueno (2000) = Slide2 #54: single row of micropiles (shear force 10.7 kN, spacing 1 m, passive), fixed circle照査する量:Factor of safety FS (simplified Bishop method)数値(繁体字)
S-07Sheahan & Ho (2003) Amherst soil-nail test wall = Slide2 #47: two rows of passive soil nails, φ = 0, planar wedge照査する量:Factor of safety FS (simplified Janbu method)数値(繁体字)
S-08Single wedge + one soil nail (H 6 m vertical cut, α 55°, T 150 kN/m, FS-dependent force application), Spencer method照査する量:Factor of safety FS数値(繁体字)
S-09Generalized Hoek–Brown parameters: GSI 50, mi 10, D 0照査する量:mb数値(繁体字)
S-10Duncan & Wright Figure 7.28 = Slide2 #86: five reinforcement layers at 800 lb/ft, grid search of circles through the toe (33 × 41)照査する量:Factor of safety FS of the critical circle (simplified Bishop method)数値(繁体字)
S-11Duncan & Wright Figure 7.28 = Slide2 #86: noncircular optimization starting from the critical circle of the Spencer grid search照査する量:Factor of safety FS of the critical noncircular slip surface (Spencer method)数値(繁体字)
S-12Newmark rigid block: rectangular pulse (A 0.5 g, T 0.5 s, ky 0.1)照査する量:Permanent displacement D数値(繁体字)
S-13Newmark rigid block: Cape Mendocino 1992 Petrolia 000 record (Δt 0.02 s, ac 0.1 g, normal polarity)照査する量:Permanent displacement D数値(繁体字)
S-14Jibson (2007) ac/amax regression equation (ac 0.02 g, amax 0.5 g)照査する量:Permanent displacement Dn数値(繁体字)

擁壁・砂防堰堤・基礎

事例照査内容(英語)詳細
W-01Soil and Water Conservation Handbook (Taiwan) Appendix 1 cantilever retaining wall example: moment at the base of the stem照査する量:Design moment Mu数値(繁体字)
W-02Soil and Water Conservation Handbook (Taiwan) Appendix 1 cantilever retaining wall example: shear at the base of the stem照査する量:Design shear Vu数値(繁体字)
W-03Soil and Water Conservation Handbook (Taiwan) Appendix 1 cantilever retaining wall example: shear strength of the stem照査する量:φVc = 0.75·0.53·√fc′·b·d数値(繁体字)
W-04Soil and Water Conservation Handbook (Taiwan) Appendix 1 cantilever retaining wall example: required reinforcement area for the stem照査する量:Required reinforcement area As数値(繁体字)
W-05Soil and Water Conservation Handbook (Taiwan) Appendix 1 cantilever retaining wall example: overturning moment in the stability analysis照査する量:Overturning moment Mo (surcharge lateral pressure 7.98 t/m @ 3.1 m, active earth pressure 9.89 t/m @ 2.067 m)数値(繁体字)
W-06FHWA MSE Example E4 (steel grid reinforcement, H 25.64 ft) external stability: sliding照査する量:Strength I (critical) sliding CDR数値(繁体字)
W-07FHWA MSE Example E4 external stability: bearing照査する量:Strength I (maximum) bearing CDR数値(繁体字)
W-08FHWA MSE Example E4 internal stability: maximum tensile force in reinforcement layer 4照査する量:Tmax (per 5 ft panel)数値(繁体字)
W-09FHWA MSE Example E1 (geogrid, broken backslope) external stability: sliding照査する量:Sliding CDR for the critical combination (Pd 32.15, Rr 36.0 kip/ft)数値(繁体字)
W-10FHWA MSE Example E1 internal stability: maximum tensile force in reinforcement layer 2 (Sv 2.0 ft)照査する量:TMAX数値(繁体字)
W-11Gabion rock-fill unit weight: γs 26 kN/m³, porosity 35%照査する量:Gabion unit weight γg数値(繁体字)
W-12USFS gabion wall Example 4D (simplified trapezoidal section, H 18 ft, β = φ = 38°): active earth pressure照査する量:Resultant active earth force PA数値(繁体字)
W-13USFS gabion wall Example 4D: factor of safety against overturning照査する量:Overturning FS数値(繁体字)
K-01Check dam design example, Case 1: not filled with sediment, Hm 8.12 m, earthquake, ordinary flow照査する量:Factor of safety against sliding (f1·ΣV + Pp)/ΣH数値(繁体字)
K-02Check dam design example, Case 3: filled with sediment, maximum flow (h 2.0, hc 1.38, hck 1.0)照査する量:Factor of safety against sliding数値(繁体字)
K-03Check dam design example, Case 4: filled with sediment, earthquake, ordinary flow照査する量:Factor of safety against sliding数値(繁体字)
K-04Check dam design example: seismic active earth pressure coefficient (φ 35°, δ 21.8°, Kh 0.22)照査する量:Kae (standard Mononobe–Okabe, inclined wall face and sediment surface)数値(繁体字)
K-05Check dam design example: static active earth pressure coefficient (φ 35°, δ 21.8°, α 10.13°, ε̄ 38.66°)照査する量:Kac (Eq. 2.1.13)数値(繁体字)
F-01Bearing capacity factors: φ = 30°照査する量:Nγ (Vesic)数値(繁体字)
F-02Bearing capacity factors: φ = 30°照査する量:Nc数値(繁体字)
P-02Project-file check dam ([[swc.check_dams]] + body): Handbook Appendix 4.1 design example, Case 1照査する量:Total horizontal force ΣH数値(繁体字)
I-01Liquefaction potential, HBF method (R4 L-1: N 10, ER 70%, FC 15%, z 6 m, groundwater level 2 m, A 0.24 g, Mw 7.3)照査する量:Factor of safety against liquefaction FL数値(繁体字)
I-02Laterally loaded pile (Chang's method, R4 C-1: D 1 m, Ec 2.5×10⁶ tf/m², N 10, L 30 m, free head)照査する量:Coefficient of horizontal subgrade reaction kH数値(繁体字)

よくある質問

誰が照合したのですか。

HyGeoWorks がプログラム自身で照合しています。参照値は、引用した文献、他ソフトウェアの検証例、解析解によるものです。第三者の認証を受けたものではありません。

自分で再現できますか。

できます。HydroStudio をインストールした PC で hydro verify-benchmarks を実行してください。時間のかかる事例を含めるには --include-slow を付けます。試用版でもこの報告を出力できます。

オンライン版とデスクトップ版の結果は同じですか。

同じ Rust のソースコードを WebAssembly にコンパイルしたものです。2026-11-13 に 376 ケース・101,613 個の値を比較し、最大相対差は 4.9 × 10^-16 でした。